Search results

I have BNIB top speed headers. I ended up going with oem headers instead. These are new in box headers shipped direct to me from top speed in October. Actually rear was just recieved in December since they originally sent me two front headers. Some modificstion may be required per top speed...

Up for sale is a used RM Racing exhaust system. The exhaust itself is in good shape and just needs a cleanup/polish if you desire. This is stainless steel and can be polished to a mirror if desired. It has the rare DTM quad tips. If you are FI, this is the exhaust for you. It is 2.5" all the...

I was running a BBSC at 9.5lbs of boost with no temperature issue even after long 20 minute track sessions. This was with stock radiator and shroud. Is there a max HP that the stock system can cool? I am going turbo and shooting for 650 whp and thinking I will need to upgrade the radiator...

Complete BBSC Novi 2000 supercharger kit- 5000.00 plus shipping. Currently installed on car, I plan to remove in August can arrange earlier if needed. I want to put this for sale before it is removed so that potential buyers can see the BBSC first hand if local or if you are remote we can video...

SOLD Brand new in box. Opened box to take picture. Description from SOS website. Asking 1700 OBO shipped ground or + my cost to ship quicker. Can drop off for shipping within a day or so. DESCRIPTION design & drivability: With an emphasis on drivability, the clutch pedal pressure is...

I have a set of 3.0 rods and pistons from a motor i believe had about 85k miles on it. Selling all 6 for $500 or $100 each +shipping. The engine was running when removed and rods and pistons appear to be in good shape. I am going to forged on my new build and no longer need these. Can ship or...

I am thinking about tackling several maintenance items but have been short on time. Looking for experienced tech to either work alongside me or possible just have them do the work. I have a lift and most tools so could do the work in my garage but I am open. Looking at the following items I...

Does not look like the gasket kits are available anymore if I have a local machine shop rebuild the heads will they be able to source all the parts/gaskets? Would I be better off sending the head to a reputable NSX shop for the head rebuild and have the machine shop just do the bottom end...

MACATTACK had some great photos in his rebuild thread but the links are no longer active. I am getting ready to remove my engine and looking for a good thread with photos on how and where to attach the engine lift to raise the car without damaging it. I thought he had a good photo of a home...

I am looking to get my engine rebuilt and very interested in the SOS custom FI stage 1 build. Before pulling the trigger I was looking for second opinions and other options for expreinced NSX engine builder preferrably on the east coast. Chris at SOS has always been helpful but cost and time...

Engine for sale. 2800.00 located in northern Virginia. Approx 90,xxxx miles serial number C30A1 1302956 Partially disassembled can inspect or I can send pics. I am willing to loosely assemble for packaging if you arrange for pickup. CurrentlyI have the heads off, piston and rods removed. Was...

Anyone in are planning on NSXPO this year? I am thinking about heading out for the track days only but have not made up my mind yet.

I had the FIC tuned about a year ago. It ran well but I have noticed at idle and cool it runs rich the UEGO epreeds 10 to 1. It also seems like in boost it has gotten a bit richer as well from around 11 to 1 10 or 10.5 to 1. I always thought the Fuelt able which reduced the fuel cycle to -39...

Here are a couple laps at VIR during NSXPO. I have a bunch of photos to upload and will do so soon. 1992 Acura NSX 150kmiles. Novi 2000 supercharger (380whp). Starspec tires, OEM brakes w/street pads, Bilsteins shocks w/OEM springs. Video 1 Video 2

What are respectable lap times for an NSX at VIR on street tires. I am curious as to what one could expect to run there. What are the track times in ranges such as novice 2:40-2:55 intermediate 2:20-2:40 and advance 2:10-2:20? How much time would you reduce the time by for a forced induced...

I picked up this hood a year or so ago from another prime member. It fits well but I want to stick with the stock hood. I can bring it with me to NSXPO if I have a buyer lined up. Otherwise pickup in northern VA or I will meet within about 75 miles. Asking 450.00 Sent from my SGH-M919 using...

I want to print out a large cutaway image of the engine and car similar to the Hulsey images in the NSX book and am trying to find super high resolution images. I did not see on the Khulsey site where you can purchase his images. Does anyone have access to super high resolution images that...

So I got the tech inspection which ask to have the checklist completed by your mechanic prior to the event. I am my own mechanic. So can complete the checklist? Sent from my SGH-M919 using Tapatalk 2

I am headed to NSXPO and was planning on redoing my alignment before I head down. Anyone else planning on doing the same? Thought I would change my tire saving alignment back to stock parameters since I think the car handles much better that way. I have spoken with a few of the local owners...

There is a car show in Bealeton this Sunday July 14th from 9am until 1pm. I am trying to sell my 1969 Mustang so I am going to have it there and will probably take the NSX their as well. Here is the info- Advance Auto Parts store at 11079 Marsh Rd in Bealeton VA from 9 AM to 1 PM. the 7/20...

I have a 92 with the AEM FIC and got it tuned today. This is the odb1 car runs great but when I go into boost the TCS light comes on. Does not matter if TCS is off or on the TCS light will come on solid shortly after going into boost. If I just rev the engine without load thus no boost it...

Finally got the last part in for my BBSC install and started up the car. I did this with the base calibration running with a fuel map created using a new injector size of 550 and stock size of 240. This created a -56% adjustment in the map in the idle range. I am not making any changes to the...

I am getting close to getting ready to do the initial start up and will have to drive about 70 miles to my tuner and wanted to load a running file close to what I need. Does anyone have a file that they are willing to share for my drive to my tuner? I will have a AFR gauge to watch on the...

I am installing the RC 550 injectors and it appears that I do not use the two cushion o rings on the bottom injector. Is this correct? The injectors came with a black and green o-ring on the top side. The black was the highest followed by a green one. The green ones were torn a bit so I...

Looking for a 6-8lb BBSC pulley. Let me know if you have one for sale and how much. Thanks, James