Hello primer
Should the rotor be covered the entire surface with brake pads, or is it normal to have some gap in the inner side of the rotor? Or are the brake pads are small for the rotors![IMG_3031[1].JPG IMG_3031[1].JPG](https://www.nsxprime.com/data/attachments/132/132159-af68a971c96dbec287d67930d4c3234f.jpg)
The brake pad is applied and as you can see the pad does not cover the whole surface of the rotor, maybe several mm off?
![IMG_3033[1].JPG IMG_3033[1].JPG](https://www.nsxprime.com/data/attachments/132/132161-2c830474bc04a36dc99f47527a45bacb.jpg)
This is the old one that has rusty line on inner ring
![IMG_3034[1].JPG IMG_3034[1].JPG](https://www.nsxprime.com/data/attachments/132/132162-9a5d6199c202fe31111bea401bf5f212.jpg)
Should the rotor be covered the entire surface with brake pads, or is it normal to have some gap in the inner side of the rotor? Or are the brake pads are small for the rotors
![IMG_3031[1].JPG IMG_3031[1].JPG](https://www.nsxprime.com/data/attachments/132/132159-af68a971c96dbec287d67930d4c3234f.jpg)
The brake pad is applied and as you can see the pad does not cover the whole surface of the rotor, maybe several mm off?
![IMG_3033[1].JPG IMG_3033[1].JPG](https://www.nsxprime.com/data/attachments/132/132161-2c830474bc04a36dc99f47527a45bacb.jpg)
This is the old one that has rusty line on inner ring
![IMG_3034[1].JPG IMG_3034[1].JPG](https://www.nsxprime.com/data/attachments/132/132162-9a5d6199c202fe31111bea401bf5f212.jpg)
Attachments
Last edited: