Search results

Looking at buying from a private seller, car is registered in Florida and has a lien with Bank of America. Any idea how long it will take to have clear tittle in hand after satisfying the lien? I need it cleared asap in order to import to Canada. Appreciate any input or advice on how to...

In the process of dong an 02 front end update and wondering.... am I safe using aftermarket 55w ballasts for the HID's or should I go with 35w units? Will the heat from the 55w ballasts damage the headlight housing?...thanks in advance. cheers

Set of TSW Mondello wheels and Tires $700 plus shipping Wheels are in good condition with very minor rash on edge in a couple of spots Fronts 18x8 +35 225 35 18 Yokahama Parada tires 60-70 % tread (minor toe wear on inside) Slight rub on full lock up on my 95 Rears 19x9.5 +35 275 30 19...

This past winter I was busy doing a major mechanical refresh including: Timing belt /water pump/gasket set Brake master and clutch master/slave and hoses Aluminum rad and all coolant hoses All fluids 13" brake upgrade Interior/audio upgrade including my 2din console with cup holder Strip and...

Just completed timing belt, hoses etc. and can't seem to remember where these two items go. Update: Bracket solved....just the rubber thingy....Anyone know? thanks

Anyone know the thread size on the shift knob? thanks

Trying to source some front end AC lines for a 91 ( items 9,10,11 in the attached drawing) Catalog shows one set of part numbers for 91-92 and another set of numbers for the 93 and up. Earlier version of #11 is discontinued , found some later model parts used but don't know if they will work...

Looking for front end AC lines for a 91-92 since parts catalog indicates they are unique to those years, if anyone knows differently please let me know ....items 9,10,11 in the attached drawing. cheers

Looking for a set of 97 plus OEM headers. Did a quick search and they seem to be going for $300 to $400 depending on year, willing to pay up to that shipped to 14303. thanks

Fiberglass Double Din Console complete with all mounting points. Ready to go, just attach your ashtray assembly and shifter boot using OEM screws. This is a handmade piece and comes in a grey primer finish. It will require some finish sanding and prep before paint but overall very straight and...

I have 1 set of 02 Style rear spats, molded from OEM rear valance and made from hand laid fiberglass with a grey gel-coat finish. Excellent fitment, installs over existing 91-01 rear valance with 3M tape or windshield adhesive. Easy install, no need to remove anything! No body work...

Looking for a stock steering wheel for a project, not too concerned about condition as long as it's in one piece. oh, and cheap.:biggrin: Thanks to all that have responded..... but I don't need one in good shape, I have 2 good wheels now..just don't want to hack up a wheel that someone else...

I have 3 sets of 02 Style rear spats ( SOLD ), molded from OEM rear valance and made from hand laid fiberglass with a grey gel-coat finish. Excellent fitment, installs over existing 91-01 rear valance with 3M tape or windshield adhesive. Super easy install, no need to remove anything! No body...

Alpine CD Changers CHM-5610 and CHM-5630 both for $100 shipped! 2 cartridges and mounting hardware included. 5630 purchased new few years ago, works PERFECT... very little use , few scuffs on one side from stuff kicking around in the trunk. 5610 purchased on ebay used, never got it to work...

I have 1 set left. 02 Style rear spats, molded from OEM rear valance and made from hand laid fiberglass with a grey gel-coat finish. Excellent fitment, installs over existing rear valance super easy install no need to remove anything. No body work required just prime and paint. $210...

I have several OEM audio components for sale. I am located in Toronto Canada but I can ship from the U.S. so don't be concerned about duties or taxes. Thanks Alpine CD Changers CHM-5610 and CHM-5630 both for $120 shipped! 2 cartridges and mounting hardware included. 5630 purchased new few...

Looking around at various double din installs and none seemed to flow very well with OE equipment, so I thought I would try something a little different. Not quite happy with it just yet, but I thought I would post a quick phone pic and get some input. I'll post some better pics later. Cheers

02 Style rear spats, molded from OEM rear valance and made from hand laid fiberglass with a grey gel-coat finish. Excellent fitment, installs over existing rear valance no body work required just prime and paint. $175 plus shipping http://www.nsxprime.com/photopost/data/500/spat02.jpg...

Pm me or email at [email protected] for the number. thanks again

Came across this company in Niagara Falls N.Y. called CBI Parcel Services that holds shipments for pickup. They charge a flat fee of $5.95 per parcel and NO DAILY CHARGES. I have had a few parcels sent there in the last little while and it's worked out great. You save big on the brokerage fees...

Anyone one know the size and type of fitting on the brake flexhose where it connects to the hardline in the wheelwell? Thanks

Started a thread in the Do it yourself forum a while back looking for some help from all the talent on this site....maybe you guys could take a look and put something together, link is below.....look forward to your input. thanks http://www.nsxprime.com/forums/showthread.php?t=98483

Started this widebody project a while back as an HSC replica, as it's evolving I find myself leaning towords creating more of a concept car with some HSC styling cues as well as some inspiration from other prime members poto chops that I have seen posted in various HSC related threads . I...

Looking to buy 02 headlights that i can use to tool up some custom headlights. Cracked or broken housings are fine as long as most of it is intact. Also, if anyone has a damaged set that you don't want to sell but would be willing to lend or rent for a week or so....I would be willing to give...

Looking for the front bumper steel re-inforcement bar , windshield washer reservoir and upper bracket that mounts urathane bumper to the re-bar.