Search results

Selling a one off BBK off my NSX Uses 13.7" front and rear rotors that are 28mm thick. The setup clears my 17" advan RG fronts with room to spare. Uses SLC 6 piston front calipers, and SLC 4 piston rear calipers. Does not include E-Brake so ideal for a race car! Everything has...

Hey guys, I am just posting this here as it is aimed mainly at you fine folks! I will be out there with my team competing in the GTA portion! Would be great to see you guys out there! We setup this code JUST for you folks to get in for free to watch or discounted prices if you wish to...

Ok guys, brief backstory... please read to the end! Yes I have searched and read dozens of threads on here regarding this, but most do not post a resolution that has not been tried already. Car started showing intermittent code 12 about 2 years ago (it would go on, then go off on Key Off and...

Long shot I know but if anyone has or knows someone who has a REAR wheel race or complete wheel for the BBS LM1 / LM069 series, please reach out. ET is 42, and I believe width was 9" I truly need just the undamaged face in any color but will purchase a full wheel if someone has an incomplete...

If anyone in the NOLA region has a spare REAR rotor or two, please contact me immediately 480 204 2717 Need asap! - - - Updated - - - Disregard. Had to get creative. Machined a spare front rotor down to fit on the rear. Wish me luck!

As mentioned in title, looking for SOS for Comptech USA headers in the 91 variant. Not really interested in other headers at this time! Visual condition isn't as important as piping integrity (if it has cosmetic blemishes, that's fine, as long as not dents). Prices shipped to 85284 Thanks!

As stated in the topic, I need to borrow a Targa top car for about 1-2 hours to test fit a Strut Tower bar. Please let me know if you can help via [email protected]

Needed some used parts from SOS and they had them ready to go for me before I even could get to their location. Always trouble free and pleasant!

Well I just finished a great weekend at ITREXPO as I do every year and am now in Chicago for 1.5 weeks. Anything going on that might be fun to check out here in CHICAGO? I have my track NSX here although it is in a trailer... but it is street legal if i fix the headlight lol! -Ravi 480 two...

Anyone up there have an NSX? Driving through in a couple weeks and will probably stop in Amarillo for either dinner or stay overnight.

Looking for this part # 41581-PR8-J00 It is the stopper for a 4.23 Type R Final Drive. If you have one and can get it to me by the middle of next week, let me know! Trying to get my FD in for nationals but there is a backorder on getting this part from japan apparently so I thought maybe i'd...

Couple vids from this weekend. First is my UMS Time Attack laps (Finished first) Second is Jim Coz and I messing around with Intermediate / Advanced DE students for fun (I am the Intermediate group lead so these folks drive with me a lot)...

As topic describes.... looking for an uncut OEM key of any type for my 91 NSX! Thanks! -Ravi - - - Updated - - - Got SEVERAL! Thanks prime!

Looking for the final piece to my track car, which is the 6 speed transmission. I have a good condition 5 speed available for trade + cash or will buy outright. Thank you!

Finally cracked 200k on my NSX during the RCG Open House day! still 100% problem free! Only items that have been replaced due to failure is 1 window regulator, and a clutch (That had 189k on it). A testament to the trouble free operation of the NSX! Still has ice cold A/C, working bose...

My OEM clutch finally bit the ghost at 199k, so I had SOS set me up with their basic sport kit seeing as my street NSX is a stock engined car that isn't track driven. Installation was easy, fitment was good. I have put about 500 miles on it of gentle driving since installation and the clutch...

Will be visiting Chicago for a couple weeks, bringing my old track car for a weekend at Elkhart, but have time to kill there! Anyone up for some NSX banter / care to show me some cool places? Late 20's gear head!

Looking for a center console bezel, with the lower half intact (the portion near the e-brake). The a/c vent area can be cracked.

Looking for a pair of bumper lenses. They can be in rough shape, for a track car!

Well i'm having a weird issue, and have worked through pages 19-100 and 19-102 on regarding type 3-1 TCS The car is displaying a CEL for code 36, but has continuity from the Green/Yel from ECU to TCM. There is also voltage at the TCM on this same wire (3.5v). I have swapped ECU and TCM with...

As the title states, I am looking for a driver side Retractor Motor in known working condition. Price shipped to 85284! Thank you!

NSX Recovery / Track Addiction - It's back yet again Prime! I have been wanting to do this for 5 years now. The time has finally come. Progress will be updated as often as possible. The goal is to be testing / tuning by the summer and racing by 2015. This is Source1's old widebody car...

I had the pleasure of installing a new crankshaft and bearings in the NSX I just purchased recently and I must say, COZ and SOS have really gone above and beyond this time. Starting with DIAG, SOS was there with the answers I needed to find the problematic parts. COZ, for supplying me with a...

Looking for a job... anyone have any ideas? I am 7 years deep into middle management... Resume available upon request. Just need some work :)

Looking to purchase a USEABLE 3.0L Crankshaft. Please contact asap. Have tried SOS, Driving Ambition, Coz!