Some forum links did not survive the move from vbulletin to the new platform. If you find any links that target old NSXPrime forum threads that are no longer working, please PM me or post here and I will try to fix them.
ALL RODS SOLD
I ended up with 6 rods left over after making 2 matched and balanced sets, these are a little too far off in weight balance to make another matched set so I'm selling them individually. These are one of the more interesting bits of NSX memorabilia, as it was the first production...
When you remove the TCS computer from behind the left side seat the rear panel loses one of it's mounting points since it attaches to a bracket on the TCS computer case.
The fix for this is to use the NSX-R/NSX-S rear panel bracket which bolts in place of the TCS computer. The part number is...
Anodized Bronze Rays Volk ZE40s for sale. $2200
17x9+40 and 18x10.5+24
All wheels were ceramic coated about a year ago so are very easy to clean and look great. 3 wheels are nearly perfect, but one of the 18s has some minor scratches around the lip from being improperly packed for shipping by...
Clearing out some parts that I've been tripping over for too long. You probably clicked here for the cams, and yes there is a catch.
OG Comptech Camshafts. Some lobes have some damage that will need to be repaired. Supposedly the engine they came out of was doing fine. I was told not to run...
Selling off some engine parts I don't need.
New ATR Racing Billet Camshafts (Comptech profile) - $2000
This is the Comptech cam profile reproduced using a billet manufacturing process instead of hard welding. I had Calico Coatings apply their micro finish surface treatment for friction...
Looking to buy OEM titanium rods with "P" or "Q" weight codes on the big ends. I've got 5 P rods and 5 Q rods so looking to complete both sets.
The weight code is hand-etched into the parting line by the rod bolt.
For those of you who have been following my build thread, you've already seen some of my plans for this engine, as well as all the past plans that were either interrupted or I changed my mind about. I'll spare you the gritty details and sad backstory here.
At the time of this writing I'm...
I got the English cam cards from Toda for their A, B, and C spec cams so I'm posting them here for easy access and discussion.
I've listed both the cam specifications from the cam cards, as well as my measured lift and duration where applicable. For my measurements, cams were installed in a...
Edit: Found what I was looking for, mods please close.
Looking for a set of OEM C30 connecting rods, let me know what you have. I'm looking to either purchase outright or trade if I have something that interests you.
I have a set of brand new forged Carrillo H beam rods for C30 that I'd be...
Up for sale are my never used ATR Racing billet camshafts. These are clones of the old Comptech hard weld cams but recreated using a superior billet process. After receiving them, at the recommendation of Howard Anderson (owner/operator of Howards Hotrods and Darton East) I had Calico Coatings...
SOLD SOLD SOLD
Purchased from Mita earlier this year, the electrical connector was chipped in transit then repaired by HQ Engineering.
I bought this thinking I was going to keep TCS, then installed ITBs and deleted TCS and I still haven't upgraded my ABS, so might as well just use the S2000...
SOLD SOLD SOLD
Used but very good condition Zanardi floor mats. Now discontinued. They were in my car for a little while before I decided the red trim was not for me. Asking $300 + shipping and fees OBO
I was looking at old posts on the Endyn Facebook page and came across these photos from September 2017. I wonder whos car these ended up on, I'd seen rumors of NSX head work from them but never any photos until now.
I'm looking for a set of Swift lowering springs for use on stock shocks, they are discontinued despite still being listed for sale on multiple sites. Let me know if you have some to sell!
***Sold for $1050***
I have a set of cams from a manual transmission NSX for sale, these will fit years 1991-2005 and would be a nice upgrade for anyone who's done an auto to manual swap and still has the stock auto 250hp cams. If whoever buys these wants help getting their 91-94 ECU set up to...
It's a long shot but I figured I'd ask, could save some time during initial setup. I will be installing and tuning an AS motorsport ITB setup on AEM v1 at some point in the next couple months.
I'm looking for a set of Downforce Type R replica seats, ideally with the power rails but that's not required.
I could also trade my OEM recently reupholstered seats (black nappa leather + red stitching) plus lots of cash if you want.
SOLD Trunk carpet mat, this is NOT the same as the coveted trunk mat, this is the carpet piece used in the newer NSXs but it can be used as a trunk mat. $165 on Mita, I bought it but didn't end up using it, $120+shipping.
Front license plate holder, in good condition, new ones are about $130...
Looking for NA2 rear calipers and brackets, let me know what you have. Any condition is fine.
Edit: Nevermind just bought them from Rockauto. Cheaper than I've ever seen anyone offer them for sale.
I haven't seen this discussed anywhere except for rarely on a few Honda forums in regard to Civics and Integras, so I decided to make a post here in case anyone else encounters this issue.
91-94 NSXs have both a IACV (idle air control valve) and an FITV (fast idle thermo valve) that manage air...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.