Search results

I have decided to remove my Ikeya sequential shifter (with optional gear indicator) and revert to OEM 5 speed. So it is for sale for $1,500. This is a discontinued item and it is very hard to come by. It is in very good working condition. Photos will be available upon request.

I am running the twin Lovefab intercoolers placed directly in front of the 2 air cond condensers as recommended by LoveFab. Since then i have been having problems with my air cond unit. It is just not cold enough. Anyone else using the Lovefav twin intercoolers? Any solutions to this problem...

I am from Kuala Lumpur Malaysia and I will be visiting LA (25, 29 March to 1 April 2013) & Vegas (26 to 29 March). I will be staying in Bellagio Hotel in Vegas and have not decided on which hotel to stay in LA. I would like to rent a car for the 4 of us to drive to and from LA to Vegas. Any...

I have resisted for a long time and finally succumbed to temptation and crossed over to the "dark" side.:biggrin: [/IMG] [/IMG] [/IMG] I am still running in the new car and wont be able to do a comparison with my nsx. [/IMG] I apologise for the wrong orientation of the photos. I dont...

Problem: extremely low oil pressure after engine rebuild. Half to one bar (5 to 15 psi) at idle and maximum of 3 bars (45psi) at WOT. Engine rebuild details Block sleeved by Dan Benson of Benson Racing. Cyclinders, con rod and crankshaft (Brian Crower) supplied by FXMD. Built by local mechanic...

I am in the midst of building a new engine for FI. The sleeves have been bored by Dan Benson. I bought a race engine rotating parts from FXMD. A 3.2 replica of their race engine. The parts have been balanced by a machinist. The main and conrod bearings were installed according to instructions...

I am sure most of us have considered rebuilding our engine at some point in our ownership of our NSX. I hope this thread will list out all the vendors and the motor packages and stroker kits offered by each of them. I understand that SOS sells 3.5 stroker kit for FI and NA application. I have...

Is there any vendor for modified fuel rail or system for high hp application for the nsx? If not, what are the DIY solutions that members here resort to? Photos and advice or opinion will be much appreciated. I have searched to no avail for any off the shelf products. TIA

A few Malaysian nsx owners welcomed the new year with a drive up the hills of Genting Highlands. Attached are some of the photos of the nsx and owners. If you pay attention, you will notice that there is a genuine nsx-r driven by a F1 test driver. Mahaza88 with his "new" Advan Model 5...

Please register in this thread if you have a NSX in Malaysia. I am in contact with a handfull of NSX owners in the Klang Valley. We do meet up regularly for Sunday drives. We would love to hear from other NSX owners.:smile:

My NSX has precision 6265 DBB turbo, walbro 255lph fuel pump, 750cc RC engineering injectors and AEM fuel regulator. It has methanol injection too. I am running low on fuel at high boost and high rpm leading to AFR close to 13. Do I have to change to bigger injectors or higher capacity fuel...

I am thinking of upgrading my ATA intercooler to WTA from SOS or lovefab and I need answers to the following questions: (1) will the front mounted heat exchanger fit if the NSX has the nsx-r front bar and the STMPO front chasis bar. (2) will the system work if the nsx has the nsx-r bonnet...

I am looking for a set of Cometic MLS head gaskets 90.5mm bore for FI application. None of the vendor that I have contacted has it in stock. If there is any vendor out there who has it please contact me. TIA

I would like to get a set of used 17 front and 18 rear Advan Model 5 from Japan. The only problem is sizes for NSX is hard to come by. So the only way to do it is to buy a set of 4 NSX sized 17 inch and a set of 4 NSX sized 18 inch. Is there anyone in Malaysia or Singapore who would like to get...

My ex girl friend was in Chicago recently and she brought these beauties back for me!! I can't wait to get these installed and retune my NSX.

Currently I have the prospeed turbo kit with garrett T04S turbo with T3 4-bolt exhaust housing and 0.63 turbine housing. I wanted a GT35R with this kit but for reasons best forgotten, I ended up with the T04S. I have just bought a set of Lovefab FI headers to replace the topspeed headers that I...

I have just completed my ABS upgrade using KSP engineering's wire harness. I had quite a bit of problem with the wiring because i cant read japanese but i have finally figured it out after a few trial and errors. First thing to note is that SOS' wire harness is different from KSP/GT-rom and...

i need to know which american oem parts dealer is willing to sell their parts and ship overseas. Obviously low price and fast turn around time is crucial too. TIA

I am getting a set of the latest ATS carbon 1.5 way LSD installed on my nsx. Is it necessary or advisable to change the differential taper bearings change while I am at it. I am also changing all the seals and other worn bearings. TIA

Does anyone know if the older advan model 5 17x8 et38 and 17x10 et45 will clear the stoptech bbk? I have found a used set and would like to purchase it if it clears the stoptech. Apparently the same offset will clear stoptech bbk for the new advan model T5. I am hoping that someone here can...

I have all the parts and wire harness required for the 97+ ABS upgrade. The problem is I bought all of these from Japan and the installation guide is in Japanese. I would appreciate it if anyone here on nsxprime can email me the installation manual in English. My email is [email protected]. TIA

Some of you may know of my fiasco in buying the Prospeed Turbo Kit but i am one who believes in giving others a second chance. So I placed an order with Prospeed/Brian Dinh for a full Stoptech BBK after he promised me it "should only take 3-5 days to be assembled and delivered to" Prospeed and...

I would like to get a ATS LSD for my nsx. I understand that ATS has reduced it's price substantially for it's carbon LSD for the NSX. Is there any ATS dealer onnsxprime?

To all you Stoptech and wheel gurus out there: I have just bought a set of Stoptech BBK from Brian of Prospeed. I am now looking for a set of new wheels to clear the new Stoptech BBK (front and rear with e-brake). I came across a set of Volks CE28N 17x8 et44 and 18x19.5 et 40. Will these...

I currently have DF's oem HID headlight for my 02 headlights. the right side is noticable brighter than the left. I had the same problem before my 02 facelift conversion when I had whitensx's HID headlights. What could be the cause of this? Wiring, relay? TIA