I have a OEM side scoop for any year NSX, but the plastic insert is from a 91-94. The insert can be changed and the scoop painted to match any NSX year 1991-2005. The unit is painted in Sebring Silver Color Code: NH-552M. It has a few small chips in the paint and that is why I have this one...
I have for sale a used Dali Fire Extinguisher Bracket w/ a Kidde Extinguisher. This piece is powder coated black and is in perfect condition. Mounts to the passenger front seat mounting bolts and sits securely on the floor in front of the passenger seat. I used this piece for years in my car and...
SOLD - 2004 NSX-T Red/Black 6-Speed 25773 JH4NA21624T000036
Car Information
Year: 2004
Type: NSX-T
Transmission: 6-Speed
Exterior color: Red
Interior color: Black
Odometer: 25,773 Miles
VIN: JH4NA21624T000036
Price: Price $90,995.00
SOLD, Thanks Thomas I hope you...
I have for sale the used prototype intercooler core. It was used during design and testing for my turbo setup on my car. The core was built by Bell Intercoolers to my specifications and was designed to take the place of the VVIS plate in the OEM intake. The unique design allowed the charged air...
I have a Front Dali Racing 1" Track sway bar for sale, this is the 1.0" diameter bars with 3 adjustment holes and is in the shape of the OEM front bar. Dali made several versions of this bar and this is from the last run they made it is about 4 years old and was installed on my 2004. The bar is...
I have for sale my used custom engine management and gauge setup for the NSX. The system is complete with everything except injectors (I have a set of RC550 injectors and injector adapters for a 97+ NSX for sale as well).
Engine Management:
AEM F/IC - The system uses an AEM F/IC for fuel and...
I have an EGR Valve from a 92 NSX, I believe they are the same for all years but you will want to check that out for sure. It was in perfect working order when removed and has been used on several NSX to help diagnose EGR problems with out any issue. It is sold AS-IS as it is a used part.
New...
SOLD - Carbotech XP12 & XP10 Brake Pads - NEW for OEM brake calipers
I have a complete set of NEW Carbotech brake pads for the OEM calipers for sale, they are XP12 compound for the fronts and XP10 compound for the rears. Many guys run this same setup and have had great success on the track...
These are the rear knuckles from the NSX, they have a single ball joint in the bottom of the knuckle that in the old days could not be replaced and as a result we would have to replace the entire knuckle if the ball joint failed. Now thanks to some guys manufacturing the ball joint we can now...
SOLD - Billet Oil Pump Gear - NEW
I have a NEW billet oil pump gears from Pro Drive, these were sold through Dali Racing and are the same gear sold by other vendors as well. They are a very good idea to use to replace the OEM gear if you intend to add forced induction and/or intend to track the...
I have a set of OEM Tie Rod ends for the Left and Right sides, they fit 1991-2005 NSX, they list for 105.77 and can usually be bought online for around $80.00 ea. plus shipping.
(1) - 53540-SLO-A01
(1) - 53560-SLO-A01
I am selling the set of tie rod ends for 100.00 +Shipping, +PayPal fees...
I have a NEW old stock NSX Type-R front upper chassis bar, this includes the bar, two mounting brackets, and 4 mounting bolts. All parts are OEM Honda parts and are in new condition in their original OEM packaging.
I am selling this Type-R upper bar and brackets for $95.00 +shipping, +PayPal...
I have a new old stock NSX power antenna replacement mast, I bought this a few years back when there was concern that some parts would be discontinued. As it turn out Acura has discontinued this part but it is still available from Honda for the time being. They list for $71.96
I will sell it...
I have a set of Dali Racing Street/Track sway bars for front and rear, these are the .875 diameter bars with 3 adjustment holes front and rear. They are red and have a few scratches and scraps from being used on the car, bushings and clamps are included and are in good shape, easy to install but...
I have a set of Science of Speed non-compliance front pivot clamps, they have been installed but are in perfect working order with all needed hardware and instructions to install them. These will fit all NSX 1991 to 2005.
These sell for over $200.00 new and I am selling them for $100.00...
I have a set of TSW Interlagos rotary forged wheels with staggered fitment 17" Front and 18" Rear. The Interlagos is a strong and light weight wheel perfect for track duty. These were used as a track setup and have brand new NT-01s mounted on the front and NT-01s with about 14-16 heat cycles on...
SOLD - Climate Control Unit main control board
This is a climate control board that was out of a 92 NSX that needed its CCU repaired, I purchased a CCU board from another Prime member and sent it into BrianK for repair. Once I got that board back I fixed the CCU and this is the bad board from...
SOLD - OEM Head Units
I Have (3) OEM NSX Head units for sale, All are complete but I do not know if any or all of them work. They are of varying condition as far as the cosmetics go. I can sell them as a lot or individually with the first buyer getting pick of the litter. I can send detailed...
SOLD - OEM Instrument Bezel Plastics
I have a full set of OEM instrument Bezel plastic in great shape, no broken taps and the clear gauge cover is nearly perfect. What you see is what you get. Great for a custom gauge project. There are no electronics included with this it is just the plastics...
SOLD - Zublin SmarTenna
Zublin Engineering SmarTenna Model 300. Lowers OEM power antenna when OEM head unit is on and is not in radio mode. This is the original version and requires the wire harness of the antenna itself to be spliced, all new connectors are included so it is ready to install...
SOLD - ARK Performance Exhaust DT-X
I have for sale my ARK DT-X Quad Tip Exhaust for a 91-96 NSX. I had this on my 91 NSX and purchased it new in 2007. When I sold the NSX I gave the new buyer the choice of OEM, CT or ARK and he chose the OEM. So I removed the ARK and put it on a shelf in my...
SOLD - Seibon 2002+ OEM style Carbon vented hood
I have a Seibon 2002+ Carbon OEM style Type R vented hood for sale. It has been on my car for 3 years and has been garage stored in a temperature controlled garage. Only exposure to sun light is when out for a drive. The hood is in very good...
HRE 547R Wheels and Tire Combo - SOLD
I have a set of HRE 547R 3pc. Wheel with silver painted center and polished lip for sale. Tires are included (if you want them) and are Yokohama S-Drive front and rear. Fronts are nearly new with less than 500 miles on them and the rears are older with...
We leave for COTA in 1 week and will be running for three days at the end of the month, its been crazy getting all the cars ready for the first event.
The group of guys I run with have all had a good winter to prep and upgrade their cars, me I added LED tail lights. Ha!
My buddy with the...
Brand Spanking New NCM Motorsports in Bowling Green, KY
I was lucky enough to get a chance to play at the inaugural event and first ever HPDE event for NCM Motorsports at there new track in Bowling Green, KY.
We ran the Grand Full Course a 3.15 mile 23 turn track with a 2300' main straight and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.