Search results

Old Guy, MotorMouth93 thanks for the info. I guess its pointless digging into this unless the ECU is modified or I switch to a different ECU. Superhatch, based on the input from these guys above, I don't think Hondash would work for us.

Hey guys As most of you, I like to tinker with my cars and have a bunch of dedicated OBDII cables and software for my daily drivers. For the NSX, I've been looking for something that is a bit more convenient and insightful than the paper clip technique. Searching google and ebay results in...

Thanks for taking the time to share your knowledge and of course, putting together the videos :) I've watched a few of them and they are a good source of info. BTW, your son is a great helper! I hope mine grows up to be the same way. Cheers!

I thought about doing this several times myself, but I do not have access to a fancy sewing machine. As for material, the moving/utility blankets that costco sells may be ok I think? They are soft and have a bit of cushioning to them. I bought a pair couple of years ago but then ended up using...

Hmm thats not too bad. I might be tempted to do this - mostly coz I hate that fatass stock wheel. Which is fat in all the wrong areas, for some reason. Reminds me of the one in my dad's 91 Ford Taurus. As for sewing the new cover, I don't think I have the patience to sit through 4 soccer...

As a Mech Eng myself, I've always loved the engineering behind these cars. I mean, just look at all those suspension parts with their awesome, weight saving design and beautiful finishing. To me, this attention to detail behind every component is what makes our cars stand out. Sure, there are...

That looks great man! Thanks for sharing the great details. How much did it all end up costing you?

I've had my eye on this for a while, as well :) But currently, other items on the car need attention so I will have to wait for this upgrade. I also have a background in engineering and find this package to be exceptionally put together. Johan has also been very kind over email and responded...

Hi guys I have a 94 5SPD with the old whipple. Previous owner did the TB, but I am thinking of getting this done again. Before I go order parts from the local dealer, just wanted to confirm the parts. In a different thread, LarryB posted this list of parts: 14400-PR7-A01 1 Timing Belt...

Can't wait to see it, great job man. Amazingly detailed work and commendable patience on your part :)

Guys, in case someone stumbles upon this old thread, there's some reason for concern with the quality of the harnesses supplied by PEFI. Read through this thread to get some idea...not sure if we are supposed to post links, swap out the xxx for www :) Just sharing info that I found...hope...

There are some threads on this... check old posts eg. http://www.nsxprime.com/forum/showthread.php/180492-CTSC-1-6-pulley-sizes-1991-3-0L?highlight=whipple+pulley+diameter also...

Anytime, man. Don't forget to put sealant on the end that mates up against the fuel rail, and on both ends of the crossover hose (that connects the two rails). There was another thread on this a while back... lots of discussions on where to use sealant and where not! :) Conclusion - on the...

AN 6 is right. Banjo bolt is 12x1.25 cheers and good luck check here: http://www.nsxprime.com/forum/showthread.php/34419-Need-Fuel-Banjo-AN-6-Fitting

Great, thanks for your honesty and sharing some tips :)

Thanks guys, I do have an AEM Series 2 and a UEGO upgrade waiting to be installed - that comes after I get this thing back up and running so I can drive it to the shop lol :) I will put up a detailed post on my fun with the previous setup one of these days haha cheers

Thanks for the input guys. I am waiting for my gauge to arrive - I will be installing it this weekend after I rebuild the fuel line going from the filter to the injector rail. So I just want to make sure the pressure is up to spec. As I mentioned, I have the old whipple, no fuel resistor and...

Hey guys Can someone confirm what FP readings should be expected for an NA1 with the old Whipple, no fuel pump resistor and 'bumped' stock FPR ? I have read that it should be around 40 psi, but then again, the wiki SC section says that it should be 100? Thanks

The banjo bolt on mine that connects the fuel rail to the fuel filter is 10mm x 1.25mm thread.

Hey guys, looking for one of those mounting plates for the ashtray with 2 gauge setup. I believe SOS used to make these and there were some primers that were trying to make some 3D printed ones. let me know what you have and how much :) thanks

Thanks Drew, for all your kindness and the greetings... all the best to you, as well.

Cool, thanks for the feedback on the S2K cluster. I've been thinking about that for a while...I'll have to drop some hints for my wife to pick up one for me birfday! Do you have the part # for the shift knob you got? I tried google, but all I got was useless shill and penis enlargement ads...

Hey nice car, man. Wrap looks good in the pics, too :) How is the instrument cluster working out? BTW, whats the part number of that euro accord knob? Is it the same thread etc? Cheers

Hey guys, looking for a cover my ex... something light and compact, mostly for indoor storage. Let me know what you have ! :)

Hey guys Just thought I'd share my experience with fixing up this crappy ass part. I am pretty sure its the *only* article Honda ended retaining from the original Pininfarina design lol. So anyway, I don't have pics right now, but I will try my best to share my experience in this Flintsonian...