Search results

Welcome back Goodson Acura in Dallas, ask for Justin to do the work Also independent shop in Denton owned by Jason Rupert 940-566-2125 Met him at a NSX meet in 2018, but have not done business with him David McDavid Acura in Plano, their longtime master mechanic Carl retired a few yrs ago Good luck

Will these clear StopTech BBK ? Thank you

Exactly the same one I have, works great Quite sure it’s from Science of Speed

As far as referring you to a local shop…. Unfortunately Tony Palo at T1 race in Royce City now ONLY works on GTRs, exclusively I used a shop in Carrolton off I35 that I won’t name and had a very poor experience there There may be other places across the country, but the only place I can...

About 15 yrs ago in 2007 I was one of the early 3.8 SOS builds. Initially had some problems with coolant getting in the oil Tony Palo at T1 Race here in Dallas ended up machining out an OEM head gasket to make it work 6-7 yrs later I lost compression in the #1 cylinder, sent the car back to SOS...

Last week my 30 yr old, 92 NSX daily driver, with 240,000 miles, SRS lite came on , horn did not work Checked the horn & SRS fuses, did the continuity test on at horn relay, all ok I suspect a short or cut in the steering cable reel? Since I don’t have a steering wheel airbag and the car did not...

If this has the double din cut out I’ll take it no matter what it is made of

Cleaning those contacts works great for my 92 My 92 with 236,000 miles, left turn signal would not cancel, right turn would cancel prematurely. Did NOT remove the knee bolster, but followed the above instructions, cleaned the contacts with alcohol, did not re-grease, put back together, worked...

Frank at Strutwise repaired some gas struts for my dental chairs back in Nov 2020 His health is not good, he told me he was waiting for a lung transplant and is tethered to an oxygen tank. He works when he’s feeling ok. Be patient with him. I talked to him on his cell: 604-417-1883 Say a prayer...

Anyone tried Gen 2 seats in a NA1 car?

Trunk struts If you will Google: GSB NSX Trunk struts A company called Bonanza sets a set of 2 for $55 that they claim have a higher psi rating than OEM I’ve not used these, but you cannot ship your old ones to Frank at Strutwise have them rebuilt and shipped back for this price Good luck and...

Oil pressure sender Another option: Science of Speed sells a kit that mounts the sensor on the rear firewall for less vibration/ longer life Good luck

Window regulator rebuild I’ve used Window Motor World in Florida They have rebuilt both my drivers and passengers sides for my 92 with 231,000 mile daily driver Julie takes orders, Ernie is the tech & owner??? Mine came back with stronger cables Good luck

Shipping from Canada I just received a condenser fan I purchased from a prime member in Canada Shipping time was a little longer than I expected, but with Covid who knows what to expect Hope you stuff arrives soon

Amayama was great Ordered and paid for that EVAC idle control valve on June 24 shipped via FedEx direct delivered 6 days later on the 30th Shipping cost $64 for that $187 part

Does anyone know if The NSX Shop or renamed Speedy Parts Japan is still in business? I’m looking for a EACV valve part # 36450-PR7-A01 for my 92 NSX that part shows discontinued here in US. THX, JV

NSX seats Just tried to send you a private message Got an error saying your quota space for PM’s was full and could not accept my message Email me at JohnValant at sbcglobal dot net

My ignitor failed, so I replaced everything including the coils with the kit from AS Motorsports in Europe Nice kit, no ignitor to fail, only negative is the connector to the main harness is a perfect fit to the OEM, but the connectors at each coil are generic and not NSX specific Good luck

I had 2 separate occurrences with my 92 NSX with 220,000 + miles 1st was about 1 mile into my office commute at 25 mph and the engine just stopped, all dash lights came on, BUT, the car would crank, but not start..... the ignitor failed. I replaced it with the AS Motorsport ignition kit that...

Last year I used Window Motor World @ *(800) 252-2649‬ They did a nice job on mine, heavier cable Good luck

His above Quote: "I've got 12+ years on here and have sold dozens of very cheap to very expensive NSX parts on this board over the years including engine / transmission / and a full front clip, and I've never had anyone but you have any problems." Doesn't it seen unusual to have sold "dozens" of...

CAUTION.....This seller is miss representing what he is selling I purchased the above items, split the shipping costs with the seller I was particularly interested in the exterior door trim piece What I received was not only badly scratched up, ok that’s the 7 out of 10, what made this junk was...

Contact JoTech MotorSports in Garland, TX 972-494-2100 Even tho most of their work is on GTR’s they did a very nice job installing an AEM Infinity and tune for my 92 3.8 NA. They do engine rebuilds and should be able to recommend a machine shop to you. Good luck

Yes

I’m interested in the rubber piece that rubs on the OUTSIDE of the glass that sits horizontally from the door handle forward. That piece on my car has shrunk about 1/2 in due to age & heat & sun exposure here in Dallas Do you have that available? Has yours shrunk? Cost? Thx, jv