The surgeon general has determined that smoking is hazardous to your health, so I present this ashtray conversion. (Not that you'd let anyone smoke in your NSX anyway.) You can convert the lighter port to as USB phone charger as shown as well.
https://photos.app.goo.gl/EwK5rRHtG6DLLxs27
Original part: 77710-SL0-A01
Revised part: 77710-PID-A01
The design uses multiple trapezoids to achieve the largest storage cubby possible, accounting for the rivets in the outer ashtray assembly. Filleted to match the OEM console and designed to use the ashtray’s latching mechanism. It has a “back” to obscure the view of the ejection spring behind it. There is a second latch release point hanging down just in case the lid does not release the cubby. I made it stick out further in the picture above to make it more obvious but it's regularly flush to the upper surface.
Print in PETG, or ABS if you leave your car in the sun. NO PLA.
To remove the old ashtray, push up on the cover (where it says push) and the ashtray will pop out. The storage cubby attaches using a similar latching mechanism. Push it in until it latches and remove it the same way as the ashtray. Cover can still close.
Files available at: https://www.thingiverse.com/thing:4846135
https://photos.app.goo.gl/EwK5rRHtG6DLLxs27
Original part: 77710-SL0-A01
Revised part: 77710-PID-A01
The design uses multiple trapezoids to achieve the largest storage cubby possible, accounting for the rivets in the outer ashtray assembly. Filleted to match the OEM console and designed to use the ashtray’s latching mechanism. It has a “back” to obscure the view of the ejection spring behind it. There is a second latch release point hanging down just in case the lid does not release the cubby. I made it stick out further in the picture above to make it more obvious but it's regularly flush to the upper surface.
Print in PETG, or ABS if you leave your car in the sun. NO PLA.
To remove the old ashtray, push up on the cover (where it says push) and the ashtray will pop out. The storage cubby attaches using a similar latching mechanism. Push it in until it latches and remove it the same way as the ashtray. Cover can still close.
Files available at: https://www.thingiverse.com/thing:4846135
Attachments
Last edited: