my 92 kinda has this. The door handles are stock, and they/the surrounding trim (with the nsx logo) have become faded. I rubbed the faded part a little with my finger the other day and it was clearcoat that flaked right off... on BOTH sides it's like this.
It's now on my to-do list to pull the...
This is a little wrench to make removing the side vent nuts easy. It has a hole so you can tie a piece of string on it in case you drop it.
I printed with nylonx so it will last forever with 4 walls and 40% tri infill, but I'm sure any material will work since the nuts aren't THAT tight...
what are you doing browsing facebook/interacting with anyone on there?
I've pretty much removed myself from FB and barely go on there. Fk that place.
I just ordered my s2k ABS kit from you, and completed installing it, and have ordered a bunch of OEM stuff over there years. I have no...
nevermind, I took the sensor out, used the multimeter and checked the resistance at the connector in the trunk. Infinite resistance.
Cut into the cable right by the sensor to see if it was the wire... nope. Still infinite resistance instead of 800ohm.
Ordered a new one.
Recently we've had a cold spell - I went to start my 91 and it barely turned, and didn't start, so I connected the battery tender and let it charge to full.
Now, when I drive it, the traction control is constantly engaged, limiting my speed. The ABS and TCS lights are on.
I pulled the codes...
I'm starting to fix all the little things that bug me with my nsx, I'm trying to find part numbers for these. I think the front window seal is 73152-SL0-013.
Or is it 73151-SL0-023?
Also the rear hatch seal that's separating, is that 73212-SL0-000?
The little triangle molding that's chipped...
So just to update this, replacing my coolant tank fixed it.
The SOS coolant tank had a leak in it. Also the baffle inside came unfixed and wobbled around a lot. I believe air was being introduced into the system and bubbles were making light throttle feel uneven.
Replaced the tank and filled...
I don't know what the solution is, and maybe I got a rare bad one from SOS, but when I took the 3 year old one off, I noticed a piece of metal clunking around inside.
For the last few weeks I've been hearing it, and I couldn't figure out where it was coming from! Thought it was an exhaust...
SOS says either I send it back to be repaired and have a few weeks down time, or buy a new tank at a discount. Also said there might be something else wrong like a clogged bleed hose that could be pressurizing the tank.
The bleed hose is clear, any other reason a tank could over pressurize and...
Not sure if these work or the condition of the capacitors on the sub, but they've been sitting in my garage for 3 years and they gotta go.
EDIT SOLD SOLD SOLD
85$ shipped for both in the continental USA.
Replaced my alt last year with a rebuilt one and they didn't have any core return. I believe it had low charge so it likely would need a rebuild, but would be good if you want something to polish/send as a core.
90$ shipped in the continental US.
whelp, i'd say that officially fixed it.
I replaced the turn signal box, and have been switching my lights on and off rapidly all week and it's never failed.
I put the old box back in and switched them on and off and it failed after ~4 switches.
If anyone wants the old busted box to test with, LMK.
I tried directly grounding the black wire to/from the turn signal box... but that didn't make any difference.
I'm going to try reflowing the circuit board tonight, since it will be ~1.5 weeks until the part is shipped to me since they have to order it.
I don't know enough about electronics to...
cool, ordered a new one. Last night I noticed that even when the plug is in the turn signal control box, the lights will occasionally fail to turn on until I tap on the turn signal box.
After taking it apart, it looks pretty crusty in there. A lot of the solder is covered in corrosion, I'm...
A while ago I had an issue where all my lights shut off mid drive. After letting it sit for a while, the lights turned back on and it was fine.
I replaced the headlight relay and thought... that's that.
But I was driving to work the other day and noticed my turn signals wouldn't cancel...
This sounds ridiculous typing this, but I can't figure this out...
I've got a dash cam, its supposed to take 12v direct. I've wired it up to the accessory plugs in the kick panel fuse box with a spade connector...
3 coats of plasti dip is a thick amount of rubber. I doubt it has stuff in it that could damage the paint as I can just peel it off by hand. It doesn't completely adhere.
You think sitting in the sun will get it hotter than an engine compartment of a car racing around a track? Coolant gets to...
Just over a year ago, my original coolant tank finally went out and started spewing out of the seams.
So I thought... damn... that lasted a long ass time. I'll just get another OEM one and it will go another 20 years.
Well, here I am, just out of the warranty period 14 months later. This one...
side of the ccu has a "ccu repaired by xxx" sticker on it, as far as i remember. So the caps were replaced at some point already... everything else works fine.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.