|
||
|
|
|
| ||||||
Can I Make My "Acura" Say "Honda"?[HS] If you order the Honda hood emblem, the "H" comes color coordinated to the car. They ask for the door jam color code when you buy one. The red cars, of course have red backgrounds, but ALL the NSX-R cars have the red background.
When replacing the "Acura" lettering in the rear center light, I found out that if you spray dish washing detergent mixed with water on the lens, you can easily slide the 'NSX' around to place it in the proper position. Once in position, 'squegie' out the water and let it dry until peeling off the backing. [GM] Here's the info on Honda badging for the NSX: 44732-SLO-000 WHEEL CAP COVERS (4) This information is from January of 1992. At that time the cost was nearly 11,000 Belgian Francs plus shipping. YMMV. The dealer I used was: Belgica, S.A. Note that in the phone number, "011" is the prefix for making an international call from the U.S. (other countries, use whatever is appropriate), "32" is the country code for Belgium, and "2" is the city code for Brussels. If you find that you are able to purchase these or other parts, please post additional information to the list.
[A/H] I just checked the parts computer, the first and third part are available in the American Honda parts system so you can order them. I doubt I can get the others but I will try. Don't hold your breath. Removing the front emblem[GM - 2001/6/28] The emblem on the nose of the car is held on by retainer
clips, one on each leg of the emblem. You can heat the emblem with a hair dryer
until the adhesive gives way, gently pry the thing up about a half inch (put
towels on the paint when you pry and be very gentle) and snip the legs. The
'back' pieces will fall on the ground. When you put a new emblem on, use the
adhesive only. It's worked fine for me for years. |
|
|
