• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Nelson's 91 NSX

Joined
3 April 2000
Messages
95
Location
Ft Lauderdale,FL USA
View

Wingswest front spoiler
View


View


View


Porsche Twin Turbo Brakes!!
View



[This message has been edited by James Cruz (edited 14 September 2000).]
 
Originally posted by johne:
What kinda brakes are those? did they come
with the NSX logo?

The brakes are, Brembo's Porsche Twin Turbo Brake Calipers, and Rotors. The Porsche Logo was stripped off and the Caliper was ingraved with the NSX Logo.
 
I love the rims they look close to my Manarays. If Manaray make 18s and 19s I'd have them for sure. But since they don't I may have to copy you Nelson!
smile.gif


The car looks strangly like mine! Same color scheme, 3 piece 6 spoke wheels, lowered, and wings west air dam. But hands down you have me beat in the mods department. But I'm working on it. I guess it just shows that we both have EXCELLENT TASTE! HAHAHAHA

Are you getting the rest of the body kit? I think I will after I get a few other things out of the way.

Also I got the CF intake and I love it, thanks for the help in finding one.

[This message has been edited by PUREVIL (edited 25 September 2000).]
 
Yes Purevil, I am getting the rest of the kit put on this weekend. It should look KICKASS!!!!!!! Hey your car has 10k miles, you beat me on that......

I just had Titaniumvtec drive my car this weekend with my new 6spd,4.55's, and CT Competition clutch. You should have heard him on the 2way radio, while I was behind him in his 94 Red/Tan. He was in total amazement on the difference over his stock 94(also have to take into account all the other boltons too).

I'm glad your happy with CT airbox. BTW, I think they sent you my MT-90 Tranny fluid by accident? :)

Take Care.
 
Hey Nelson,

Yes they did send me the tranny fluid but I sent it back on thursday of last week.

I really like that CF intake. I think I have to get the CF top even though its a waste of $$$. I think its stupid they give you the bottom half (WHICH YOU CAN'T SEE) in carbon fiber but not the top (PART YOU SEE THE MOST) is stock!

Anyways my car will be in storage soon
frown.gif
so after I get the top ordered I think that will be it for a while. Over the winter headers, coilovers, rest of the body kit, Sparco seats and other little items will be taken care of.

Someday I'll get to the 6 speed swap but I have to many other things to do, like finish the stereo in my suburban!!!!

Are you getting the whole kit? The side skirts and the back pieces? Or just the sides? Either way you'll have to post more pics because I wanna see it on a black car
smile.gif


Well take it easy and thanks for hookin up a North Dakotan with some NSX parts.

Evil

[This message has been edited by PUREVIL (edited 25 September 2000).]
 
Jay,

The wingswest kit looks awesome. I installed the side skirts, and am ordering the rear spats. I will be posting some pic's in the near future with the side skirts and hopefully the rear spats. I am most likely going to go with the aggressor rear wing. That is the one CT sells. I hope to get the rear done before NSXPO.

BTW, are you going to Atlanta?
 
Nelson,

Am I going to be at NSXPO 2000????? Are you kidding me!
smile.gif
I can't make that trip to Alanta! Trust me I truely wish I could! You'll just have to take lots of pics and post them here. But some day DAMN IT I'll see your NSX in person. Have a good one in SUNNY AND WARM FLORIDA cuz its cold as HELL and I think its going to snow SOON
frown.gif


My $.02 on the wing looks to LEGOish, meaning it looks ADDED on, and not flowing like the rest of the car. If you could get the wing form the wide body kit would be cool. But like I said thats my opinion, and its your car.

I think I'm going to try and get the Back Yard wing. I just have to find some where I can get it. I like it Because its clean and keeps the stock lines but it has that cool adjustable center piece which looks like carbon fiber (I HOPE).

NSX_Backyard_Rear.jpg




[This message has been edited by PUREVIL (edited 04 October 2000).]
 
What I meant by the Agressor wing, is the Comptech wing that they use on their wide body kit. I don't like the Commando wing because it looks to bulky. The agressor wing looks like the oem, but it sticks out a little in the back.
 
Hey Nelson,

According to the Comptech Site this is the pic of the Aggressor wing. I do like the wide body kit wing let me know what you find out about how much it is. I still think I'll stick with the back yard wing if I decide to get a new wing.

180012_installed.jpg



[This message has been edited by PUREVIL (edited 04 October 2000).]
 
Your car is BADASS!

What's the offset of the rims?
and what size tires are you running?
how much did the rims cost?
thanks


*one more thing, I didn't see on the wingswest website any rear grounds or "spats" as you say. do you have a picture of it?


*another question... is that a red seatbelt that you have in there? if so, where did you get it? or is that one of those seatbelt pads?

------------------
Richard

[This message has been edited by Veleno (edited 04 October 2000).]

[This message has been edited by Veleno (edited 04 October 2000).]
 
Hi Richard, Thanks for the Compliment. I don't know the exact offsets on the wheels because they were custom built to fit my Big Red's (TT Brembo's). HRE usually build their wheels to a particular application.

I am running Pirelli P-zero 225/35/18 front, and had 295/30/19 rear, but just replaced with 285/30/19.

The wheels are about $4200, depends from who you buy them from, and what options you get.

I just ordered the Rear spats. I'm pretty sure it is in their website when you look at the full body kit, but I'm not 100% sure. I ordered them from a Wings West dealer in New Jersey (cheaper). If you call Wings West I'm sure they can refer you to a pic somewhere on the their webpage or on another picture of an NSX with the kit. I saw them on an NSX in Tampa, Fl.

I have the SCHROTH RACING (Red) 3" 4Point Harness with Camlock release. They were purchased from Dali Racing.

Regards
 
Hey Nelson,

After looking closely at Ice T's NSX pic I noticed that it looks like the rear fenders sweep back to make the wing look smooth and keep the lines clean. So I don't know if it will work with stock fenders.

So if you wanna sell your wings west kit (sides and back spats) for the comptech kit let me know.
smile.gif
LOL
 
Ok, I had to revive this link because I remember how bad ass the pics were, and I want to see them again. Nelson, you still here? Can you post again?
 
Back
Top