Reply With QuoteIt is totally fine.Originally Posted by spase
Steve
Hi guys
Can I run 265/30/19 on a 19x10inch rear wheels. Are they going to be stretch alot? Does anyone run that setup? Any pics?
THANKS
Last edited by spase; 08-24-2008 at 09:29.
91 red, 18/19 Advan Kreuzer V, D2 coilovers, uni filter,TAITEC header, TAITEC GTLW, weight reduction, 02rear valance, mode 4 diffuser and type R wing.
It is totally fine.
Steve
I think they look perfect. I had 275's and switched to 265's because I like the way they look. It does not look stretched, but gives the sidewall a little curve.
NSXCA SouthCentral Rep
[[-]] (()) [[\]] [[)) //-\\
1991 Acura NSX, Black on Black
To give you an idea, here are some pictures....
NSXCA SouthCentral Rep
[[-]] (()) [[\]] [[)) //-\\
1991 Acura NSX, Black on Black
Zishan,
What offset you have for the rear ? Thanks.
Last edited by Red-N; 08-25-2008 at 06:52.
THanks guys
91 red, 18/19 Advan Kreuzer V, D2 coilovers, uni filter,TAITEC header, TAITEC GTLW, weight reduction, 02rear valance, mode 4 diffuser and type R wing.
My offset is ET42 I believe. I could go more aggressive, but that's the way the wheels came and I don't feel like messing with spacers anymore...
NSXCA SouthCentral Rep
[[-]] (()) [[\]] [[)) //-\\
1991 Acura NSX, Black on Black
What is your rear camber at? I am running Koni's with H&R's and cant get any better than a -2.8, and you look even worse than that!!My offset is ET42 I believe. I could go more aggressive, but that's the way the wheels came and I don't feel like messing with spacers anymore...
1991 NSX Black/Ivory
DAILY THOUGHT: SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS
NSX24, those pictures are just for reference regarding the tires. In these pictures, the coilovers were just installed, and were completely shortened for easy install. These pics were just for kicks, I have raised the suspension up since these pictures.
However, I do have a camber kit installed.
NSXCA SouthCentral Rep
[[-]] (()) [[\]] [[)) //-\\
1991 Acura NSX, Black on Black
Was Thom's camber kit hard to install? What was involved in removing the A-arm?However, I do have a camber kit installed.
Last edited by otoro; 09-06-2008 at 01:50.
Tai Wan Ren | Taiwanese in culture and history.
Posting Permissions
Bookmarks