SOLD!!
<strike>Hey all, decided to sell my 18/19" WORK Varianza T1S wheels finished in WORK Black Coat/Work Black Chrome (WBC - it's a chrome like finish with a light shadow). It's a 2 piece wheel (barrel + face).
The wheels are in Excellent condition and the fitment is very flush.
I've never had any rubbing issues in the rear with 275/30/19 tire. The front left, however rubs a little on the plastic fender liner when I ran a 215/35/18. I'm lowered on Eibachs with close to OEM spec alignment (your results may differ because of alignment settings, suspension height/type, tires used, car-to-car variances etc).
I had these wheels custom ordered from Japan and it took 3 months for them to get here!
Specs are below:
Fronts
18x7.5 +34
R Disk (for big caliper clearance)
Weight ~24 lbs
Rears
19x9.5 +29
O Disk (for less caliper clearance and ~3.6" lip)
Weight ~27 lbs
Note: The rears will not clear 1991-1996 brake calipers without a 5mm spacer (you still won't rub if you have to run the spacer). 1997-2005 cars should not require a spacer.
Purchase includes the 4 wheels, hub rings, Work center caps, Work valve stems, with Work "W" valve stem caps (Tires are NOT included).
Wheels are nicely boxed up, but I prefer a local buyer. Willing to ship at buyer's expense.
Location- Southern California (90755)
Asking $2300 or best offer.
Boxes (for shipping estimates) are:
2 boxes that are: 20" x 20" x 10" @ 28 lbs
2 boxes that are: 21.5" x 21.5" x 11" @ 30.5lbs
</strike>
<strike>Hey all, decided to sell my 18/19" WORK Varianza T1S wheels finished in WORK Black Coat/Work Black Chrome (WBC - it's a chrome like finish with a light shadow). It's a 2 piece wheel (barrel + face).
The wheels are in Excellent condition and the fitment is very flush.
I've never had any rubbing issues in the rear with 275/30/19 tire. The front left, however rubs a little on the plastic fender liner when I ran a 215/35/18. I'm lowered on Eibachs with close to OEM spec alignment (your results may differ because of alignment settings, suspension height/type, tires used, car-to-car variances etc).
I had these wheels custom ordered from Japan and it took 3 months for them to get here!
Specs are below:
Fronts
18x7.5 +34
R Disk (for big caliper clearance)
Weight ~24 lbs
Rears
19x9.5 +29
O Disk (for less caliper clearance and ~3.6" lip)
Weight ~27 lbs
Note: The rears will not clear 1991-1996 brake calipers without a 5mm spacer (you still won't rub if you have to run the spacer). 1997-2005 cars should not require a spacer.
Purchase includes the 4 wheels, hub rings, Work center caps, Work valve stems, with Work "W" valve stem caps (Tires are NOT included).
Wheels are nicely boxed up, but I prefer a local buyer. Willing to ship at buyer's expense.
Location- Southern California (90755)
Asking $2300 or best offer.
Boxes (for shipping estimates) are:
2 boxes that are: 20" x 20" x 10" @ 28 lbs
2 boxes that are: 21.5" x 21.5" x 11" @ 30.5lbs
Last edited:
