You may want to get the Plugs, and valve adjusted at the same time....because the valves covers are off.
Ask Rob about the condition of the oil cooler hose, you may want to have this change as well.
Bram
Calling Acura of oakville tomorrow to get it done.
I have all the oem parts here is the list.
Timing belt
Water pump
Tensioner
All new belts
Vavle cover gaskets getting the valves adjusted
New hoses front and back
New crank pulley
New radiator resivor
My question is do you think they will charge me
Extra to install the new parts because I figure they have
To take the old ones off to do the job except the front hoses
Hopefully rob can help me out.
Is there anything else I should do??
Thanks
Dave
You may want to get the Plugs, and valve adjusted at the same time....because the valves covers are off.
Ask Rob about the condition of the oil cooler hose, you may want to have this change as well.
Bram
President - NSX Club of Canada
Might as well do the thermostat well you are at it.
91 NSX Red/Black
09 VW Jetta TDI White
See this post: http://www.nsxprime.com/forum/showthread.php?t=158242
NSXCessive
'91 NSX Re-Build Project "Sliding Knife" Magnum Gray - '00 NSX-T BLK/ONXY Intercooled SOS S/C
'05 TL Anthracite Metalic CT-Engineering S/C - '05 SUZUKI GSX-R600
Thanks
Talk to rob and hes going to inspect
The oil hoses and check valves.
The tb/wp is a 11 hour job at 125$
a hour it expensive that's not including parts.
Thank god for the 20% discount.
This is a 2300 job.
So you are saving more than the $50.00 for the NSXCC Club dues.
Plus, you are getting one of the Cool 91 Poster....Life is Good
Bram
President - NSX Club of Canada
👍👍👍👍on the membership
And a poster I was not aware of that thats
Awesome thanks
Dave
Got my car back
Yesterday have to say thanks to prime
And Rob at Acura of oakville.
Everthing is done tb/wp crank pully all belts
Valve adjustment all new rad hoses i think
8 in total.
Rob is amazing at what he does.
Bookmarks