Red3ullZz's NSX

Why don't you show us the new mods you've done on your NSX? Why?

laurent1475 said:

Why don't you show us the new mods you've done on your NSX? Why?

Click to expand...

Rumour has it some nice engine mods were done
Nice Accord in the pictures btw lol.

Indeed, I need to update my build thread

It s been a long time since I’ve updated my thread!

A few months ago, I had the opportunity to purchased a used but fully overhauled Comptech Whipple supercharger with a few parts.

The package included the following parts:

- CTSC kit
- Comptech Pulley (small/medium/big)
- Walbro 255 L/H fuel pump
- Cedar ridge supercharger locking tensioner
- Alternator
- Lucas 579cc injectors,
- Comptech headers
- Gruppe M carbon kevlar intake.

To complete the upgrade I also ordered:


- VEMS standalone system with few options (extra oil pressure sensor and Bluetooth adapter).
The BT adapter allow to connect a phone (or a computer) to the Vems standalone, display various gauges/infos and even upload settings/tune.
- Two extra gauges: oil pressure and oil temp
- Asm motorsport intake upgrade kit
- Replaced my Pride V2 exhaust (2“) by the supercharged version (2.5”)
+ few parts like gaskets, fuel filter, spark plugs, extra wiring fuel pump wiring...





Before installing the SC, I’ve wanted to check my engine's health and power output so I went to Dp Engineering in the Netherlands to dyno the nsx.
I wasn’t disappointed by the results, with a pretty good 294hp@8000tr/min and 296nm of torque. (Mods: DF intake scoop, stock intake with uni-filter, intake manifold, Pride RTP and Pride V2 exhaust).







For the installation I went to the only place I trust to work on my NSX : Hontec in the Netherlands. As usual, they did a brilliant job.







As for the Tune, I went to Dp Engineering and the results were higher than expected with the medium pulley: 421hp@8000tr/min and 410nm.




Don't worry concerning the curve, this is not the full scale. The graph only shows a zoom in part of the curve. So the ups and downs are normals.

Before / After:




While the NSX was at Hontec, "Shot at Speed" took few pics of my car:











Then i decided to plastidip black my coolant tank as it was almost yellow







Unplastidiped my wheels





Replaced the original intake by the RFY carbon Intake (thanks to my wife, it was my Xmas gift)



http://image.noelshac





And finally made a custom carbon trottle cover plate







I also had few gifts from friends





- - - Updated - - -

Some pictures i forgot to share:















- - - Updated - - -

Didn't have the time to make another video, only this one. It s a quick test in 2nd gear. From 60km/h to 120km/h

Just perfect!

Such a beautifully well executed and functional NSX! I can only imagine how it performs on the street now with the CTSC. I have most of your pictures saved on my phone :biggrin:

wow, nice build!

I just made this my new screen saver

Thanks for everything. Don't hesitate if you want higher resolution pictures

Absolutely one of the nicest Formula Red NSX's out there

Where do you get that inatke? Is that new? Man that is beautiful!!! Your whole build.... awesome

scammy said:

Absolutely one of the nicest Formula Red NSX's out there

Click to expand...

Damn, that's a huge compliment! Thanks

TURBO2GO said:

Where do you get that inatke? Is that new? Man that is beautiful!!! Your whole build.... awesome

Click to expand...

I bought it from Racing Factory Yamamoto. You should have a look here: http://www.rf-yamamoto.com/, but i prefer to warn you, it s at your own risk

Red3ullZz said:

Damn, that's a huge compliment! ThanksI bought it from Racing Factory Yamamoto. You should have a look here: http://www.rf-yamamoto.com/, but i prefer to warn you, it s at your own risk

Click to expand...

What do you mean? what is the risk?

You'll probably spend a lot of money with the RFY parts

- - - Updated - - -







- - - Updated - - -

Mr Yamamoto signed my intake during the NSX Club Europe tour 2016:






- - - Updated - - -




@Spa Francorchamps:

Just beautiful. Thanks for sharing.

Awesome!

I wish I could find wheels like yours. The sizes and offsets are perfect for me.

Dave

Thanks !
Concerning the wheels, you should find size and offset at the beginning of the thread

Sorry - I should have been more clear. Apparently Varrstoen doesn't make those sizes anymore....

Ah! Damn :/

very nice updates! How do you like the intake so far?

great looking car, nice work

B2FiNiTY said:

very nice updates! How do you like the intake so far?

Click to expand...

Love it... But noisy! More suction noise!

I just spent a whole day looking through this thread! On of my most favorites... Lot of inspiration here!! Keep us always entertained my friend

Very clean car

Thanks guys! I already know which parts I ll buy once I ll be able to afford them (na2 rear calipers, Nsx r engine mesh cover, front upper and lower Nsx r bar, front and rear sway bars).
I already bought na2 front caliper bracket with new rotors and brake pads... Just wait to find na2 rear calipers to install everything. I intend to paint gold the calipers.
I also replaced all the audio amps and replaced the CD charger by a simple and cheap audio unit (yatour).
I didn't took any pictures and I'll probably add more information but for the moment I'm pretty busy.
I bought another car (after 3 years of hesitation)... And I already ordered few parts for it!
I'll post few pictures later
Thanks for the compliments, I appreciate!