ABS/ALB modulator rebuild write up

[topvegcal]

put me on the list please. TOPVEGCAL

[deylo]

… and let’s not forget deylo (post #9).

O-rings/grease
1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: deylo
11: Topvegcal

[Sylvan]

O-rings/grease
1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: deylo
11: Topvegcal
12: Sylvan

Just a side note, but when I rebuilt my brake master cylinder in my MR2, the manual called for a lithium soap-based glycol grease, which is a thick, pink-colored grease that Toyota recommends for rubber parts that are in contact with brake fluid. The p/n is 08887-01206 and it's pretty inexpensive. If you're striking out on grease that's what I would use.

[deylo]

O-rings/grease
1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: deylo
11: Topvegcal
12: Sylvan

Just a side note, but when I rebuilt my brake master cylinder in my MR2, the manual called for a lithium soap-based glycol grease, which is a thick, pink-colored grease that Toyota recommends for rubber parts that are in contact with brake fluid. The p/n is 08887-01206 and it's pretty inexpensive. If you're striking out on grease that's what I would use.

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan

Deylo was two Times on the List!!!!!

[CKS Papa]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa

[Kinan]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan

[MARSOLGP]

I'm in.... Thanks
1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP

[fenixv8]

count me in

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8

[Spyder]

I'm in as well...

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder

[Honcho]

Me too

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho

[timeless1]

I'm interested as well, what's the update & pricing on this kit? I need it soon.

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho
18. Timeless1

[BobMc]

I'm in! Warren, this is great work.
Bob

[warrenw]

update: I have a line on some Grease

version 5 can be found here:
http://www3.telus.net/public/warshan...rebuld_v06.pdf

more pictures here:
http://www3.telus.net/public/warshan/Cars/NSX/ABS/

[WldNsx]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho
18. Timeless1
19. WldNsx

I'm in as well. Thank You!

[ATERPAK]

Gentlemen,
While you're at it, why not replace those two basic brake fluid hoses on the modulator with something that not only looks good but outperforms the stock hoses it came with. I've upgrade my ABS unit with Science of Speeds setup before the price went out the roof and I pulled my old unit out which now is of no use to me. I also modified the original hoses with those in the picture and no longer need them. They are in like new condition and should last the life of the modulator unit. I've invested over $150 in parts plus labor for these. Two of the fittings from the reservoir to the pump side are extremely hard to find and very expensive. I'm asking $100 for both hoses plus shipping in the USA. Let me know if any of you are interested. Please see attachment for picture,

Al T.

P.S. Both hoses are rebuildable if that should ever be needed. All parts to build these came from Earl's except for two fittings.

[BobMc]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho
18. Timeless1
19. WldNsx
20. BobMc

I'm in. Thanks.

[phryxis]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho
18. Timeless1
19. WldNsx
20. BobMc
21. phryxis

In as well. This amazing knowledge and helpfulness is why Prime is one of the best car communities out there.

[warrenw]

UPDATE:

I have ordered o-rings from Daemar and Grease all the way from Castrol specialty oils UK. (was not cheap!) I may have to raise the price to $55.00 plus shipping.

Once I have everything, I can start packaging and shipping.

Grease is in:

[steve k]

count me in too please.

[UnhuZ]

Hi,

i still want it

Nuno

[Sylvan]

UPDATE:

I have ordered o-rings from Daemar and Grease from Castrol specialty oils UK.

Once I have everything, I can start packaging and shipping.

Nice! Please let us know when they're ready so we can give you $$

[warrenw]

1: greenberet
2: deylo
3: Kitaka
4: UnhuZ
5: USAFguy22
6: NSXCessive
7: Allen Shim
8: d.n
9: dirtbag
10: Topvegcal
11: Sylvan
12: CKS Papa
13: Kinan
14: MARSOLGP
15: fenixv8
16: Spyder
17: Honcho
18. Timeless1
19. WldNsx
20. BobMc
21. phryxis
22. steve k

In as well. This amazing knowledge and helpfulness is why Prime is one of the best car communities out there.

updated steve k

[mp600]

Dear Warrenw: Please add me to the list, very much need the kit! thanks

[NSXCessive]

UPDATE:

I have ordered o-rings from Daemar and Grease all the way from Castrol specialty oils UK. (was not cheap!) I may have to raise the price to $55.00 plus shipping.

Once I have everything, I can start packaging and shipping.

Grease is in:

Awesome Warren looking forward to getting the kit and rebuilding mine up, thanks for putting all this time an effort in for us!

[warrenw]

O-rings are in!
I will start packaging up 0-rings and grease this weekend.
Send me a private message c/w your name and shipping address as well as $55.00 CDN or USD PAYPAL payment to: [email protected]

Version 5: http://www3.telus.net/public/warshan...rebuld_v06.pdf

PayPal only.
For 91 and 92 cars only