• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Blodi's Lovefab LF600 Engine and Turbo Build...

Here we go again.....a few more tweaks coming over the off season....... :smile:

<a href="http://www.flickr.com/photos/51678948@N00/11377894474/" title="IMG_20131214_181719 by blodi, on Flickr"><img src="http://farm4.staticflickr.com/3802/11377894474_7313bb527f_b.jpg" width="1024" height="768" alt="IMG_20131214_181719"></a>
 
Too bad about the weather!

Santa's Sleigh was at our place just before, to drop off our upgraded engine ;^D

Brian
 
Whatcha doin to it this winter?

Lots of little stuff really.....
-Improve fuel delivery
-WOFI exhaust
-Have AEM EMS inspected/repaired due to aforementioned vtec issue
-Retune without the meth as part of the tune and just lay it over the fuel tune (maybe add a bit more boost?)
-Install LoveFab coolant tank
-Fix A/C...not sure if its a charge or compressor issue I have
-Fit Downforce GT carbon diffuser :)
-WFS front chassis bars
-Alignment
-Detail

A lot of this would have been done before, but I literally picked up the car hours after Cody got it bolted together/tuned on the dyno and only he had a tiny bit of time to road test it.
Looking forward to it being that much more of a beast this spring.
 
That's a nice list. Are you going WOFI to facilitate a turbo change to a Garrett?
If not you should add "SCAVENGE" to your list...
Season's Greetings!
 
Going WOFI just for the performance/sound gain. I saw your great scavenge write up. Cody and I discussed a way to possibly help the oil drain a bit with the existing Precision setup for now. Down the road maybe I'll go Garrett....we'll see.
 
Going WOFI just for the performance/sound gain. I saw your great scavenge write up. Cody and I discussed a way to possibly help the oil drain a bit with the existing Precision setup for now. Down the road maybe I'll go Garrett....we'll see.

Good luck with the gravity drain on the Precision. Then look at OKI-BOY's thread as well as mine for ideas.
Seasons Greetings!
 
It appears we have a fuel delivery issue relating to the Aeromotive 340lph fuel pump. At about 55psi of fuel pressure, in boost, the pressure plummets to under 40psi. I'm betting the connector hose either disintegrated, or has somehow worked loose.

*Loose hose clamp on the pump was found. I'm censoring my words(Ryan got the full word-vomit), but a tech that was terminated last spring was the culprit on that one. On to the next item on the list.
 
Last edited:
Some nice progress from Cody n crew today. There is still a bit of adjusting/revising going to happen here, but dammit if this isn't ridiculously awesome! Not for everyone I know, but I think it suits this beast rather nicely.

<iframe src="https://www.flickr.com/photos/51678948@N00/11828372134/player/e8c2965e6a" height="576" width="1024" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

<iframe src="https://www.flickr.com/photos/51678948@N00/11828221293/player/215f009c15" height="576" width="1024" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

Eagle-eyed viewers may also note an extra one-off LoveFab bit in there. :)
 
Some nice progress from Cody n crew today. There is still a bit of adjusting/revising going to happen here, but dammit if this isn't ridiculously awesome! Not for everyone I know, but I think it suits this beast rather nicely.

<IFRAME height=576 src="https://www.flickr.com/photos/51678948@N00/11828372134/player/e8c2965e6a" frameBorder=0 width=1024 allowfullscreen msallowfullscreen oallowfullscreen mozallowfullscreen webkitallowfullscreen></IFRAME>

Beau-T-ful...
 
Some more progress shots.....

LoveFab twin chamber coolant tank.....installed.....
<iframe src="https://www.flickr.com/photos/51678948@N00/11999387336/player/5f3b198eb9" height="640" width="480" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

LoveFab WFS front chassis bars.....installed.....
<iframe src="https://www.flickr.com/photos/51678948@N00/11998933004/player/23e7e1c321" height="640" width="480" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>
<iframe src="https://www.flickr.com/photos/51678948@N00/11998868023/player/5ac80a5e9e" height="480" width="640" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

Cody also found the culprit of my exhaust tapping noise....cheap topspeed gaskets...both were like this.....
<iframe src="https://www.flickr.com/photos/51678948@N00/11998933044/player/5344bf3f9e" height="480" width="640" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

And just another close up of the exhaust/diffuser setup...this is an earlier shot...we are still kind of debating tip/no tips.
<iframe src="https://www.flickr.com/photos/51678948@N00/11999387736/player/9e873aaa49" height="640" width="640" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>
 
DEFINITELY tips!!!!

Seems to be a popular opinion today :)

Does that rear valance sit like that out of the box with the WOFI exhaust?

I know Cody had to modify some parts of the charge pipe off the turbo for the diffuser to fit. I'm not sure how much/if anything they had to modify with the diffuser or standard WOFI setup.
 
Back
Top