Is there an LED equivalent Flasher / Hazard Relay for the NSX?

I'm looking for the LED equivalent of the standard flasher relay 38300-SL0-013 so that I don't have to run the LED resistors for my next upgrade (LED turn signals) at each corner.
I've looked all over the forums / google, but no luck.

I'm sure I'm not the first one to do this, so any help would be appreciated!

Cheers,

Neil

You need to modify the flasher unit yourself by replacing the shunt resistors with something like 0.15 Ohm. Mcrider has an extraordinarily helpful post about it. It's quite easy and works well.

Absolutely Mcrider is the man for this! I just did the flasher mod and it works great. Pretty easy to do and it certainly beats hacking the OEM wiring

thanks guys - I'll check it out!

this one i think....

http://www.nsxprime.com/forum/showt...th-Hyperflash-and-Brake-Lamp-Failure-Solution

If your just doing the front end, you won't need them....

The brake lights are the only ones that need them....if you don't want the brake lamp light on in dash.....

The brake lights don't involve the flasher but do require bypassing the bulb sensor in the trunk. That disables the brake-lamp indicator on the dash. For the turn signals, whether your existing flasher functions normally or in hyperflash mode depends on the current draw of your bulbs.

There was a post about it where the guy bought a flasher from amazon for his NSX.

^^^^ DO you happen to have a link to that post? I can't find it anywhere. I got a LED relay from amazon, but it is a 3 prong relay. It looks like I will need to jump it to another connector, but of course no instructions on how to do so were included. Any help would be appreciated. This is the relay that I purchased: http://www.amazon.com/gp/product/B00KQUWPXE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00