• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Driving Ambition or SOS SC Intercooler questions

Joined
3 May 2010
Messages
813
Location
Not so Maryland
For those of you that have the Driving Ambition supercharger Intercooler core or the SOS Laminova cooler, what do you do to get the factory intake box to line up with the throttle body? What belt did you go with? I had to extend one coolant hose and my ignition control module plug (one side had enough slack) no longer reaches the module. Tell what modifications you guys had to do to keep everything lined up.
Thanks!!


Sent from my iPhone using Tapatalk
 
Sorry I didnʻt see this.

I actually ran both SOS Laminova and DA IC in my SOS SC setup.

The Laminova concept is cool, but it could use 2 more cores to allow more flow.

During testing at DA, we went with a 16psi pulley just to get 13psi....... So yea.... itʻs restrictive.

Also the laminova was leaking and after hearing DA talk about hydrolock concerns I opted for their IC.

The belt that was used is Gates GREEN heavy duty belt K060739HD
 
Batmans,
Are you sure it was restriction and not a result of larger area to fill? When I have gone with a larger volume set of heads or aftercooler box it has always dropped my Boost level.
 
Back
Top