Here at EuroBoutique, we are not just building parts for the NSX and many other cars but we are also OWNERS of these cars so we have a good understanding of what parts are needed. On more than one occasion from NSXPO events to local car shows, owners have asked us to build a replacement Driver's Side Knee Bolster panel. Apparently this piece is easy to break, wears over time and owners want a replacement piece to match the rest of their customized interior.
Since we specialize on NSX Interior trim pieces, once you have our CF dash panels, CF steering wheels, door trim, etc, the knee bolster becomes one part that may or may not match.
Recently we had a local NSX owner drop by for a full interior facelift. He ordered our entire interior CF trim setup and also have one of our steering wheels and opted to do a full interior leather upgrade using our kit. Parts replaced included:
a) CF Flat bottom steering wheel
b) CF Power window door trim
c) CF Center vent trim
d) CF Reduced Glare double din dash panel
e) Complete stereo upgrade using Hertz speakers, JL Audio and Pioneer APP Radio
f) Full Interior OEM seat, door trim and center elbow rest leather upgrade in rich leather with red contrast stitching.
When all of this was done, we noticed his OEM knee bolster was still in the previous owner's red vinyl and looked like an eyesore. What you see is the piece removed and we were thinking would there be a need to have replacement knee bolsters?
We would build this piece from scratch and offer a few options:
1) Buy the knee bolster in bare form and you can paint, wrap, or finish however you like
2) Buy the knee bolster in carbon fiber finish
3) Buy the knee bolster covered in rich leather, Alcantara or perforated leather with custom contrast color stitching
We have not started this project yet so wanted to get input from all the NSX owners - please chime in if you have interest in either option 1, 2 or 3! To get the project rolling we would need roughly 10 committed buyers with a 50% deposit. Please add your name to this thread and we will check back here often to see if there is enough interest.
thanks
Visit our NSX specific section of our website here, we will be constantly adding new products here:
The final product can be finished in any number of materials from Leather, Alcantara or carbon fiber. You can pick the contrast stitching color too!
here's some samples of our work:
Since we specialize on NSX Interior trim pieces, once you have our CF dash panels, CF steering wheels, door trim, etc, the knee bolster becomes one part that may or may not match.
Recently we had a local NSX owner drop by for a full interior facelift. He ordered our entire interior CF trim setup and also have one of our steering wheels and opted to do a full interior leather upgrade using our kit. Parts replaced included:
a) CF Flat bottom steering wheel
b) CF Power window door trim
c) CF Center vent trim
d) CF Reduced Glare double din dash panel
e) Complete stereo upgrade using Hertz speakers, JL Audio and Pioneer APP Radio
f) Full Interior OEM seat, door trim and center elbow rest leather upgrade in rich leather with red contrast stitching.
When all of this was done, we noticed his OEM knee bolster was still in the previous owner's red vinyl and looked like an eyesore. What you see is the piece removed and we were thinking would there be a need to have replacement knee bolsters?
We would build this piece from scratch and offer a few options:
1) Buy the knee bolster in bare form and you can paint, wrap, or finish however you like
2) Buy the knee bolster in carbon fiber finish
3) Buy the knee bolster covered in rich leather, Alcantara or perforated leather with custom contrast color stitching
We have not started this project yet so wanted to get input from all the NSX owners - please chime in if you have interest in either option 1, 2 or 3! To get the project rolling we would need roughly 10 committed buyers with a 50% deposit. Please add your name to this thread and we will check back here often to see if there is enough interest.
thanks
Visit our NSX specific section of our website here, we will be constantly adding new products here:
https://euroboutique.us/collections/nsx
The final product can be finished in any number of materials from Leather, Alcantara or carbon fiber. You can pick the contrast stitching color too!
here's some samples of our work:
Last edited: