Hello, Hope im posting in the correct section.
New nsx owner here and i am having some trouble with the ALB/TCS system.
Firstly....when both check lights were on i discovered that the connector for the front left wheel sensor was destroyed. The sensor side pins where just out and hanging. Those red and white wires in the wheel sensor main cable....is there a positive and negative to it ....does it matter which side of the connector. The car side connector is fine.
For that i guessed and i connected it and reset the system by pulling the ALB2,3 fuse. The TCS light remains off now....but while driving the ALB light alone now comes on after a while.
Upon checking this i realized the main ALB 40A fuse was blown. I replaced and it blew again the next time i went out with the car.
If i reversed the terminals on the speed sensor by mistake will this cause this?? if it doesnt matter please advise me where else i can check.
Thank you for any help i get.
New nsx owner here and i am having some trouble with the ALB/TCS system.
Firstly....when both check lights were on i discovered that the connector for the front left wheel sensor was destroyed. The sensor side pins where just out and hanging. Those red and white wires in the wheel sensor main cable....is there a positive and negative to it ....does it matter which side of the connector. The car side connector is fine.
For that i guessed and i connected it and reset the system by pulling the ALB2,3 fuse. The TCS light remains off now....but while driving the ALB light alone now comes on after a while.
Upon checking this i realized the main ALB 40A fuse was blown. I replaced and it blew again the next time i went out with the car.
If i reversed the terminals on the speed sensor by mistake will this cause this?? if it doesnt matter please advise me where else i can check.
Thank you for any help i get.