Ben B's NSX-TT (smaller pics)

[nsx1164]

Smaller-size pix of Ben's 91 red/black TT project car, recently upgraded with a complete aero makeover, courtesy of CNM.

An AMAZING car, and its reportedy ungodly fast !!

More details to follow.
For now, I just wanted to post some pix.



###################

[cojones]

Looks good!!

Rear wing looks good, but seems a tad wide. Perhaps it was intended for a car with wide(r) rear fenders??

How fast is "ungodly fast" ??

[Lud]

Is that condensation in the drivers side headlight cover?

[Michigan NSX]

Are those the same front mesh grill covers MYNSX has on his car?

------------------
'91 Black/Black

[beckertb]

Thanks for the complements guys:

Cojones, the wing is the Burn-up wing. It can be used with either stock or wide bodies. The only pix of cars I have seen it installed on have all had stock rear quarters. Ungodly fast? I ran 11.99 @ 119 in a 1/4......not Ungodly fast but quick IMO.

Lud, good eye. That is condensation. The fixed buckets are not sealed, and have a tendency to collect water after being washed. It takes about 5 minutes to take the covers off and wipe underneath of them--I just didn't get around to it before taking these pix.......I'll try to do better next time ;-) It is a flaw in the design.

Michigan, yes the grills are the ones sold by "the grill guys" in AZ. They required some manipulation to fit, but seem to stay in place well.

[musclesmarinara2]

What body kit is on your car? Looks awesome!!

[NSX36]

Is it just me or am I not the only one who can't see the pics?

[smoore]

you must have had that stuff waiting for your car when you got home i'm assuming.

[beckertb]

musclemarinara2, the car has has the Wings West front lip, Grills by the "Grill-guys", Catz fogs, Raybrig HID's with Pop CF buckets, Burn-Up hood, Marga-Hills (Vinny's version 2.0) side steps, Marga-Hills rear diffuser, Wings West rear spats, and a Burn-Up Wing.

Smoore, all of the paint and body work was done by Vinny at All Cars in Merritt Island, FL--VERY nice work, Vinny.

Thanks for the complements,

Ben

[NSX2NV]

Does anyone have any contact info for the Grill Guys or a website address. Also are the pieces for the front bumper special order or available off the shelf.

What is Vinnys Version 2 Marga Hill Side Steps? Is this different than the original MH side steps.

Thanx

[This message has been edited by NSX2NV (edited 09 July 2002).]

[Michigan NSX]

Originally posted by beckertb:
...Michigan, yes the grills are the ones sold by "the grill guys" in AZ. They required some manipulation to fit, but seem to stay in place well.

How much manipulation? Any special tools required? Please elaborate as I am extremely interested in getting these grills. Thanks!

------------------
'91 Black/Black

[beckertb]

NSX2NV, the number for the grill guys is 480 628-5310, ask for Shane, he got me mine. The price was $200, and I had mine in about a week +/-. They are made of stainless steel. The center section required some trimming with some heavy snips that I had (regular tin snips probably would not cut it--no pun intended). It really wasn't too much effort, probably took an hour to obtain correct fitment for the center section. I trimmed the sides only minimally--about 5 minutes to install the sides. They fit by simple compression--no screws or permanent fixtures required.

Vinny is manufacturing fiberglass marga hills skirts that fit better than the original--keeping the door foot plate intact. They really do fit much better than any marga hills origninal that I have seen. He owns All Cars Auto Body. You can call him to purchase the skirts at 321 453 6969. He will even paint them to match prior to shipment.

Happy motoring, everyone.

Ben

[Michigan NSX]

Thanks, Ben

------------------
'91 Black/Black