This attaching directly to the underside of the OEM cover and extends back to the core support?
The mold for this component is now complete. We will be starting to produce parts immediately.
These will be available in FRP(black finish), Carbon Fiber, and Carbon Kevlar.
The photos below is of the actual plug that we developed using a genuine OEM NSX-R part. The finished undertray will obviously have a finish on both sides depending on your choice of material.
Pricing is as follows:
$325 FRP (black)
$495 Carbon Fiber
$495 Carbon Kevlar
$50 Shipping within the continental USA.
*Free shipping to first 5 purchases!
We expect to go backorder on these very quickly, so act fast if you don't like waiting!![]()
Contact me at:[email protected] if you need help with any orders I worked on.
This attaching directly to the underside of the OEM cover and extends back to the core support?
I know this is a terrible photo, but here is a shot of the underside of an OEM NSX-R - Hope this helps clarify the part a little bit.
I will try to get one installed tomorrow and take detailed photos for you guys.
Ben
Last edited by BenDF; 07-11-2007 at 14:23.
Contact me at:[email protected] if you need help with any orders I worked on.
Keep up the good work guys.
Cheers,
-- Chris
NSX Prime Vendor Listing: ScienceofSpeed
www.ScienceofSpeed.com | [email protected] | 480-894-6277
*** Please e-mail us directly at the address above rather than through NSXPrime. ***
If you guys make one modified to fit the pop-up light bumper, I'll buy one immediately. (FRP)
Kite Garage produces these parts modified for pop up headlights:
But their listed price is 89,800 yen, plus an additional 10,000 yen for airmail, which makes it more expensive.
Last edited by scorp965; 07-29-2007 at 11:14.
NSX Prime Vendor Listing: PerformancePackage
www.PerformancePackage.com
Radar Detector Mounts and Accessories
Nice!
Contact me at:[email protected] if you need help with any orders I worked on.
Sounds like a clean air HEPA system in the works !Originally Posted by BenDF
Last edited by scorp965; 07-29-2007 at 11:15.
NSX Prime Vendor Listing: PerformancePackage
www.PerformancePackage.com
Radar Detector Mounts and Accessories
Jesus drove a Honda but he did not talk about it.
For, I did not speak of my own accord John 12:49 (NIV)
Sebring Silver NSX-R Conversion
Fitting it up right now. Photos should be up shortly!![]()
Contact me at:[email protected] if you need help with any orders I worked on.
FuryNSX
- 1995 NSX-T, Equip'd by WORK!!!!
I will actually be creating a thread about it soon. The first one to guess the product once I post some hints will get one for free!![]()
Contact me at:[email protected] if you need help with any orders I worked on.
The undertray NSX-R aero enhancement fins?
Give us a clue. Is it make out of CF?
Car wasn't on a lift, so I had to do my ninja crawl to try to get some photos. Hope these clarify what this is to those not familiar with the NSX-R undertray setup.
Attached to OEM front bumper/lip. Will work with Downforce bumper/lip.
OEM attachment points.
I have an install/photoshoot scheduled next week, so I will be able to get some better photos later if needed.
Contact me at:[email protected] if you need help with any orders I worked on.
A picture from the real deal... basically same as the DF version.
BTW, I was at DF and saw the prototype version of the metal under tray, Peter will have all three versions - In both CF, FRP and metal, it should be ready very soon.
I got PM from people asking me the purpose of these two parts. Basically, when the bottom of the car is flat, it creates suction when air goes through it; faster the car goes, faster the air travels through the bottom of the car, which create suction and additional down force. The NSX-R aero treatment such as the Hood, spoiler, diffuser and the front under aero treatments are the reasons why the NSX-R can thrash the European counter parts all over the track, even though it has half the HP. Well, the lighter weight and suspension also help… Any one who like to do some high speed cruising on the track should consider these two parts!!!
Last edited by BD; 07-26-2007 at 16:54.
2003 NSX -R Wannabe Berlina Black/Red Interior #126
2008 Honda S2000 CR Berlina Black #160
man i really want something like that for my 96T.
my current oem is torn.
The Sound Of Stealth
NSX
Here is some super secret info:
The NA1 version is almost complete.![]()
Ben
Contact me at:[email protected] if you need help with any orders I worked on.
Bookmarks