The rear rotors are the same between CCB and iron but not the front:
CCB front = 380x34mm
Iron front = 365x32mm
Both the diameter and thickness (offset) are different, although they may appear to have the same fitment, so unless you also switch the front calipers or the rotor/pad life may be...
We are not against any legitimate dealers in promoting our products, however we prefer they are promoted under an identifiable company.
RB would like to credit to Mark Johnson from Deli Racing and Al Terpak of California Auto Technologie for their suggestion and help during our brake...
RB 13" BBK will fit under 17" wheel w/o any offset or clearance issue (between caliper and wheel)
Front caliper inside grinding may require to clear the rotors due to OE casting variation. Our BBK front rotors are enlarged to 13" and cover from the earlier model's 282mm to late model 298mm.
Yes, they are available.
Drilled & Slotted:
http://www.racingbrake.com/NSX_FRONT_91_05_Incl_Front_Rear_brake_lines_p/2076-351-01.htm
Open Slot:
http://www.racingbrake.com/NSX_FRONT_91_05_Incl_Front_Rear_brake_lines_p/2076-381-01.htm
Here is the link that we have been discussing about our brake development for NSX community:
http://www.nsxprime.com/forums/showthread.php?t=30881
Here are the various upgrades available from RB:
One-piece rotors
Two-piece rotors
Brake kits
Here at RacingBrake we are joining with other NSX folks to salute to your accomplishment. Wining this four-hour endurance race is in fact more challenging and prestigious than some of the “professional” races.
Your testimonial on RB braking performance proves that a simple (although not in...
This is in response to some of the concerns about the front caliper fitment for older models.
RB big rotors and extended brackets are built to preserve the OE calipers (front and rear), which means from 1991 to 2005 (15 years.)
During this time Honda (Acura) has altered their caliper...
Hi, this is Warren from RacingBrake. We just learned yesterday that our ocean shipment containing the components needed for BBK just released by customs and we should be able to ship the orders early next week. We apologize for the delay and really appreciate your interest and patience.
Our...
Thank you for the referral. The good part of RB upgrade kit is that the brackets are made to accomondate the old model's caliper and there is nothing else to buy or install other than replacing to RB brackets and rotors.
Congratulations to VintageracerNYC for your win and we are glad that RB brakes worked out great for you which coincides to our belief that a good brake does provide the needed confidence to (brake hard and) win the race.
The stock replacement front rotor OD is 298mm. We offer the rotors (two...
Yes, our BBK will fit under 16"-F / 17"-R stock wheels. This upgrade has the following benefits:
Very easy to install: Only swapping brackets and rotors. No brake line work (unless you also upgrading to stainless line)
Save big money: No bigger wheel or wheel spacers to buy, no big expenses...
First we like to thank all who expressed their interest and called us about our BBK. We scheduled them to be available in October. During the test fit we found out that the rear brackets have to be made differently between earlier (up to 96) and later model (97+) so we need a few more weeks to...
Would be interested to see if you can you double check with Stoptech to sustantiate your statement. It's not how the vane was designed, it's how the rotors are made. Are their one piece front stock rotors (97+) made to directional (Vane configuration, not surface slotting).
Here is the list of...
Dali carries different brands for one piece stock replacement including RacingBrake. Being a manufacturer we like to highlight some of the important feature of how RB rotors are made differently than others so you may become a more knowledgeable buyer.
The Design – RB is probably the only...
We have 1/3 of discs made to drill+slot, Open slot is a relatively new disc finish technology which is only offered to limited applcations. If more people indicate their interests we will make some for BBK.
For one piece rotors we assign different P/N for left and right, eg. 90071-311 for left and 90072-311 for right. However to simplify for ordering and since we only sell pair, we only list one P/N i.e. 90071-311 with qty of two.
For two piece rotors, as Bob just pointed out since our rotors are...
As Henry just said, the one-piece and two-piece rotors are available now:
One-piece: http://www.racingbrake.com/ACURA_NSX_s/106.htm
Two-piece: http://www.racingbrake.com/NSX_s/4425.htm
However, if you want the big brake kit, refer to the schedule as follows:
Thanks for the correction on wheel size which is updated. It will not affect the rotor size.
We have shown all the weight - one (stock), two piece and BBk in the table. Hope that answers to your question on weight.
We are thinking to put a package price together and may take pre-order (for...
No they are from Border which Henry quoted when he started the thread.
Raingbrake's hats are made from "forged" aluminum alloy instead of cutting from billet like most of other manufacturers, for increased stiffness and strength and they will come in black color with "EDP" paint.
RB will offer these OE Caliper brake upgrades:
For 91-96 models: (Need oversized 17” wheel)
1. Upgrade to same rotor size as 97+ brakes with RB one piece rotors* (Needed brackets being made ETA mid August or sooner)
2. Upgrade to the same rotor size as 97+ brakes with RB two piece rotors+...
We have just obtained the needed caliper brackets for old models and are completing our bracket design.
RacingBrake OE caliper Big Brake Kit will accommodate both old (91-96) and new (97-05) models and we expect to have the kits ready in 10-14 weeks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.