Search results

im in need of a used oem 91-96 clutch. i had major failure with my oem and car is stranded in the garage :( please let me know if you have a used one regardless of condition... pm...email or text is perfectly fine. help a fellow prime member out! [email protected] 707-616-3791 thanks guys bill

this is from my 94. i pulled it and replaced it with a stock unit. it wasnt too agressive but wasnt going to be used to its full potential either. the disk is worn out so you will need to purchase a new one. i paid over 1200 for this setup originally. the lightened flywheel made a big difference...

So I have done many many clutches...and this is the third time I've had my tranny off..different clutch Issues.. I couldn't get the tranny to pop back on. I'm a.s.e. Certified so mechanics isn't anything New. Do you guys have any tip or suggestions? I lubed the input shaft.. The clutch disks are...

I just want to say thank you again. Peter your business is spot on. You Guys are the best. I always have a wonderful experience buying from you guys. Today I ordered my stacy skirts from peter and as excited as I was to begin with... I was even more excited after I got off the phone. Peter...

I was at work! Around 4:30pm and it hit. I watched a transformer blow and snap a power line which fell to the ground. Threw the tv to the ground and cracked the wall. Pretty wild! I'll take an earthquake any day over the poor midwest guys with the tornado's and horrible hail! Where were you and...

Will post pics tonight when I get home. I pulled out my exedy 6puck clutch out and replaced with oem. The clutch was in my 1994. I paid almost 1500 for it new a little over a year ago Parts include flywheel used disk (worn out for reference only) and pressure plate. For a couple hundred dollars...

Hi guys its becoming that time again where we start planning for the weksos show again. Blurry mike_c have you guys heard of the dates yet or know of pre sale tickets? Keep us informed Bill

Hi guys. So I finally broke down and bought some work emotion cr kai's in gunmetal. They are 18x7.5 +42 in the front 18x9.5 +38 in the rear I didn't want a 17/18 combo I have jic coilovers My question is what tire sizes are recommended with this wheel setup without making my tcs upset? Any...

Looking for an 02+ oem hood in decent shape. Going to repaint anyways...let me know what ya got....thanks guys

Hi guys I'm in need of one skirt either a marga hills stacy or vinnys skirt...I don't care about condition or broke etc send it cut in half if need be...I can fix it. Let me know what you have I plan on paying for it plus shipping etc. I know someone has an old broke skirt laying around :)...

I need a exedy cerametallic hyper single replacement six puck disk I thought I thought I'd post on here before I went and bought. One

Hi guys I just got my new fenders done and want to get my side markers As close to the jdm measurements as possible does anyone know the measurments Or able to get them for me please? Measure from the bottom of the fender bottom of the fender To the bottom of the marker and from the inside...

i am in need of the drivers side (left) side skirt for my car. i dont care about condition and skirt can be cut in half to save on shipping if need be. please let me know asap thanks guys bill

hi guys! im looking for a set of stock front fenders. i have a set of cantrell gt widebody fronts that i would like to trade (posted in the for sale section as well). if they are oem fenders i'll trade my fenders for yours and 150 dollars. OR if you have a set of jdm fenders i will trade you...

price drop: TRADE MY FENDERS FOR YOUR FENDERS + $200obo. YOU PAY SHIPPING MY WAY AND I'LL PAY SHIPPING YOUR WAY. will consider trades as far as the cash is concerned these fenders are 950 dollars on the scienceofspeed website. i love them but i want to go a different route now with the car :)...

my 2002 brooklands green front end conversion <img src="http://www.nsxprime.com/photopost/data/500/medium/wasnt_that_hard_was_it.jpg" /> right before the front end under go <img src="http://www.nsxprime.com/photopost/data/500/medium/old_front_end.jpg" /> well. i've been thinking about doing it...

hi guys! so ive been working on my downforce 02 conversion for the last week. so i've got the left over parts from my conversion just sitting in the garage. i got a pretty good deal on the parts in the past thanks to prime..so im gonna sell the parts for a reasonable price as well. everything is...

just bought this flywheel ... its brand new. I bought a exedy clutch and turns out the clutch kit had a flywheel with it so i dont need this one. looking to get 300.00 and 10.00 for shipping sold sold to a prime member...thank you all for the interest :) you guys are the best.

wow...talk about an adventure. so, i decided i wanted carbon fiber guages for my car. not an overlay or fakers...the real deal. i called my sticker guy...a few other companies and NO ONE wanted to make them. so, i got on ebay....bought a sheet of carbon fiber and decided to take on the task...

hi guys and gals! so, im finally gettting the front end painted this weekend and clearing out the garage. i have a drivers side front fender. it appears to have once had some body work done i think? the paint is chipped a little bit...it is in acceptable condition...i have a drivers side turn...

i have a drivers side bumper blinker light (the big one in the bumper lol) 75 dollars plus shipping. i also have a passenger headlight in decent condition 75 dollars plus shipping. pm me for a picture if you need it. of course for sale as is. thanks again bill

hey there! i am selling my stock stereo stuff out of my 1994 nsx. i have the deck, both door speakers, factory sub and cd changer. stock deck 100 dollars Alpine 6 disc Cd Changer with wiring and magazine 100 dollars SOLD Door speakers (driver and passenger side complete...have not been...

hi guys trying to get the nsx put back together again. its like the humpty dumpty car :smile: my car is a 1994 brooklands green. im not concerned about the color of the parts, minor dings and dents are fine as well, the bumper has to be in decent condition but doesnt need to be a 10/10 lol im...