• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Search results

  1. S

    Volk ZE40 Wheels Anodized Bronze 17x9+40 and 18x10.5+24

    FYI, I think I ran 285/30/18 in the rear on a 18x10.5 +22 wheel with -2 camber and the fender lips rolled. Beautiful wheels!
  2. S

    SOLD: Buddy Club driver and passenger seat rails, sliders, and side mount brackets

    If they are side mount, then yes. You can adjust the width in or out with the brackets used. In fact I did have some recaro seats on another buddy club set of rails years ago.' SOLD
  3. S

    SOLD: Buddy Club driver and passenger seat rails, sliders, and side mount brackets

    LOL all good Hugh. I’m local to you if you know any buddies who want to be some race seats in.
  4. S

    SOLD: Buddy Club driver and passenger seat rails, sliders, and side mount brackets

    FS: Buddy Club driver and passenger seat rails, sliders, and side mount brackets I used these in my NSX and since changed the seats out. All you need are seats for the car to get these to work. They can use your OEM seat belts if desired. They will allow you to have the seat sit as low as...
  5. S

    GREYMRKT - NSX Battery Tray for Antigravity Battery

    I need a 91-96 ATX30. When can I purchase one?
  6. S

    NSX front upper and lower control arms, front spindles, front cross member cradles

    Still available parts front lower control arm left good used ball joint 51360-SL0-020=$400 front cross member suspension cradle driver left side 50320SL0A01 missing rubber bushing=$270 front cross member suspension cradle passenger right side 50310SL0A01=$320 Nsx front compliance pivot (1 long...
  7. S

    Experiences with Prothane bushing kit?

    I have all the front end prothane inserts but I can’t comment specifically on them for another week or two. I’ve been chasing a couple small front end adjustments and I think I have them all sorted. I’m hoping I get a chance to give a new opinion on these soon. I was Surprised to see Acura...
  8. S

    bogle's 1991 mild build thread

    Lot of the aem v1 stuff applies to the aem infinity box I’m using. It did get some. Firmware updates and some cool stuff that I’ve been playing with. Similar trial and error with the idle base position and numerous other adjustments around idle.
  9. S

    bogle's 1991 mild build thread

    Wow !! Great thread. Definitely not mild lmao. I was a member of the pgmfi forum when it was around with obd1 software called Crome and that was the place to chat about new features coming. Not sure what year but I remember using it for sure around 2000-2002? It was pretty innovative but...
  10. S

    Air Conditioning Woes

    I have some pictures from my car audio guy who removed the dash so I could redo it and I asked him how bad it was, his answer was- it is not that bad, just lots of small screws/bolts. I’m not sure exactly what is involved but he said basically it’s just takes some time, nothing too complicated.
  11. S

    NSX front upper and lower control arms, front spindles, front cross member cradles

    Still available parts: front upper control arm left needs new ball joint, bushing stuck on it 51460-SL0-010=$200 front lower control arm left good used ball joint 51360-SL0-020=$450 front cross member suspension cradle driver left side 50320SL0A01 missing rubber bushing=$300 front cross member...
  12. S

    Dali Trophy Rear sway bar with urethane bushings-NEW discontinued

    Dali Trophy Rear sway bar with urethane bushings-NEW discontinued I bought this several years ago and never used it. It is one of the strongest sway bars anyone has ever made. This bar was discontinued many many years ago and I’ve only seen 1 or 2 of these for sale in the past 5-9 years. It...
  13. S

    Megan Racing Street Coilovers Shocks Springs for Acura NSX 91-05 MR-CDK-AN91

    honestly, they look the same as any other lowered NSX. You can lower the car all the way to the ground if you really wanted to despite it being a bad idea to go that low.
  14. S

    FOR SALE: Enkei PF01 wheels, 6 wheels with toyo r888 and Mickey Thompson tires

    FOR SALE: Enkei PF01 wheels, 6 wheels with toyo r888 and Mickey Thompson tires PRICE: $1600 picked up in South FL All wheels are in very good condition as you can see from the pictures. They all clear Stoptech Big Brake kits front and rear without spacers. The rear wheels cleared with oem nsx...
  15. S

    Megan Racing Street Coilovers Shocks Springs for Acura NSX 91-05 MR-CDK-AN91

    SOLD Megan Racing Street Coilovers Shocks Springs for Acura NSX 91-05 MR-CDK-AN91 PRICE: sold for $500 shipped Removed after 3k-4K miles. All of the adjustments work well and don’t appear to have anything damaged on them. The adjustable click adjustment on the top of the struts have a...
  16. S

    NSX front upper and lower control arms, front spindles, front cross member cradles

    I can't seem to edit the 1st post anymore so NEW PRICING IS BELOW at 20% off original pricing. front upper control arm left needs new ball joint, bushing stuck on it 51460-SL0-010=$160 front lower control arm left good used ball joint 51360-SL0-020=$360 front lower control arm right rebuilt by...
  17. S

    Downforce Carbon Fiber NSX-R Front Bumper Undertray

    I have the same piece installed, amazing fitment with downforce front bumper and all other oem parts. Very strong underneath the car and has provisions for everything as far as I know. good luck with the sale, the buyer won’t be disappointed in the quality.
  18. S

    How to size and select tires for PERFORMANCE - MotoIQ

    Great article! I’ve read your opinions before and they sink in a little deeper every time. The spreadsheet was a nice touch.
  19. S

    NSX front X-brace

    Looks cool, i wish I knew how much flex there really was up front.
  20. S

    AC fan blowing randomly - Help!

    What do I look for specifically on the fcu? Just some cracked solder joints? Are these cheap to just buy and replace?
  21. S

    Procar Specials NSX

    Wow looks great! Most of the exotic car companies oem add a little plastic lip sitting under the flat floor to deter and slow down more air. I have a similar flat bottom floor from downforce but this one looks verrrrry strong! So amazing to see the f40 owner trusts you!
  22. S

    Trofeo R's out of stock at Tire Rack

    I agree for the most part except on the trofeo R tires, they are the most structurally stuff tires I’ve ever seen. I’ve seen a couple installers scratch their heads on how to get a low profile front tire installed on a 20” wheel with the trofeo R, they scratched one of my wheels. With that...
Back
Top