Search results

Billy I have been running starspec ii a 215/40/17 but read a few post about running a 235/40/17 without issue other than at full lock. Running 275 out back. I am not running traction control and thinking about either the Toyo r888r or the new Starspec iii. Any experience with either tire...

So. I rebuilt the motor and took the tranny to a local shop and had them inspect and rebuilt it. Assembled and still have the leak. Initially saw it on the dyno. Did not seem bad as it seemed to leak a few drops as it cooled down. So I took it to the track this weekend and after 3 sessions...

I have BNIB top speed headers. I ended up going with oem headers instead. These are new in box headers shipped direct to me from top speed in October. Actually rear was just recieved in December since they originally sent me two front headers. Some modificstion may be required per top speed...

Up for sale is a used RM Racing exhaust system. The exhaust itself is in good shape and just needs a cleanup/polish if you desire. This is stainless steel and can be polished to a mirror if desired. It has the rare DTM quad tips. If you are FI, this is the exhaust for you. It is 2.5" all the...

Sold.

Very sad. He was always a pleasure to talk with. Very nice man.

Coz can you send me pricing on the masiv. Also can I use stock fan and shroud. I have what I think is a burn up vented hood two holes so shud be ok for now.

Ryu are you saying with the vented hood and stock setup I will have no issue? Or vented and masiv or other radiator?

I have a vented hood currently not sure if I will keep it. I will have a a2a intercooler so won't affect the radiator cooling in the front.

I was running a BBSC at 9.5lbs of boost with no temperature issue even after long 20 minute track sessions. This was with stock radiator and shroud. Is there a max HP that the stock system can cool? I am going turbo and shooting for 650 whp and thinking I will need to upgrade the radiator...

Bearings will start to squeal when they go typically.

It is not a simple bolt on but not difficult either. I think the hardest thing is removing the harmonic balancer and putting on the bbsc version or maybe the oil pan for the oil drain. Neither are hard really. You do have to relocate the fuse box and the harness near the front of the engine...

Must disclose I am selling one of the BBSC kits currently. Going turbo the correct way is going to cost me 20k+ (sleeved block, rods, pistons, ECU, clutch, turbo kit, engine assembly, tunning, electronics, WP of tranny parts and rebuild of tranny, etc). When I installed the BBSC it cost just...

Complete BBSC Novi 2000 supercharger kit- 5000.00 plus shipping. Currently installed on car, I plan to remove in August can arrange earlier if needed. I want to put this for sale before it is removed so that potential buyers can see the BBSC first hand if local or if you are remote we can video...

SOLD Brand new in box. Opened box to take picture. Description from SOS website. Asking 1700 OBO shipped ground or + my cost to ship quicker. Can drop off for shipping within a day or so. DESCRIPTION design & drivability: With an emphasis on drivability, the clutch pedal pressure is...

I have a set of 3.0 rods and pistons from a motor i believe had about 85k miles on it. Selling all 6 for $500 or $100 each +shipping. The engine was running when removed and rods and pistons appear to be in good shape. I am going to forged on my new build and no longer need these. Can ship or...

Sent pm.

For a used kit in good shape without engine management and no intercooler 3000-3500 is a good price. I am using the AEM FIC which I picked up for 400-500 dollars. I installed the system myself and spent 400 to get it tuned. It is making around 380whp with about 9lbs of boost. I love how the...

Do you have a thread with details on your engine build? I am looking at doing a build similar to yours. Did you do any mods to the tranny or drive axles? I am thinking on my build to sleeve the block, new rods, oil pump gear, pistons, arp bolts, and then new gaskets etc throughout...

I am thinking about tackling several maintenance items but have been short on time. Looking for experienced tech to either work alongside me or possible just have them do the work. I have a lift and most tools so could do the work in my garage but I am open. Looking at the following items I...

Saw a comment that track will be Friday so is it a single track day or two days? What days are for the hdpe? I plan on being there for those days and want to book a room now.

What engine builder does Ben use?

No not yet, planning to pull the engine this summer so will find out then hopefully.

Does not look like the gasket kits are available anymore if I have a local machine shop rebuild the heads will they be able to source all the parts/gaskets? Would I be better off sending the head to a reputable NSX shop for the head rebuild and have the machine shop just do the bottom end...

THmotorsports THMotorsports is running a sale right now. Great prices on BBK kits may check them for rotor