Search results

Thanks for the kind words! I've done quite a bit of work on this and the OEM na2 headers design are actually almost dead on for peak power at 8k for the NSX. The only real improvements to be made are the collection angle on the OEM is harsh and the front bank is a bit short as Honda wanted...

Many also introduce bumpsteer when lowering the suspension dramatically over OEM. The geometry is all set up for the massive fender gap we all see on a factory suspension car. I would guess many of us are 1" to 1.5" lower than factory which lowers the roll center and introduces a fair amount...

I didn't notice it mentioned but Continental Extreme Contact Force has a 225/40/17 and a 275/35/18

Yes indeed. You can get the each wheels signal from the TCU plug behind the drivers seat. Also - correction it is the 5th gen prelude TCS button, direct swap of guts for a permanent state switch.

Would you consider separating? I am interested in the sub spoiler.

@whrdnsx FYI - the latest Comptech / Driving Ambition design no longer pressed into the arm and locks when torque is applied to the cap. This improvement vastly increases the ease of installation as well as use as you can reposition the offset if need be and you aren't in a jam if it seats...

Dear Prime folks: I am rarely on Prime. Please email me at [email protected] if you need to reach me.

For anyone revisiting this - the OEM TCS switch is a momentary switch and Haltech does not support state management for a momentary switch. You can get a 97-01 prelude tcs switch and it fits rite into the NSX plastic housing and uses the same plug and is a permanent switch to effectively toggle...

J Series most likely due to cost/availability. My friend Rich at RV6 makes stronger 3-4 gearing that is working well in 1200hp drag cars so we should be good to do some thumping around with that. Ideally I'd love a DSG or DCT mated, but will see once the path is further defined.

I'll work with Neutron on getting him an engine scan. I have a spare motor sitting in a stand. I plan to get a motor when it's ready for purchase. I will be offering a bolt in kit.

I use the Exa Nano on all the Indy Kits I make. An awesome little unit, almost silent, and keeps up great.

There are 23 kits in the wild at this point without issue. We were not able to get them to work on an OEM ECU though, The K coils do however work fine on an aftermarket ECU using OEM NSX coil settings which begs the question why they don't work on an OEM ECU. I too would love if folks could...

Don't take this the wrong way, but it sounds like there is opportunity to plan further in advance in order to secure desirable locations. In my opinion, planning for 2019 should be starting now like any other large event.

My wife and I were REALLY hoping for Sonoma Raceway.

Estimated time is 2 weeks at this moment.

Hey Bruno, I have your individual mount ready to ship. Allow me a day to get it up on my webstore.

1. Coil Dwell needs to be updated for the coils to work within OEM spec. Coil Dwell is the amount of time in milliseconds that the coil takes to reach full charge. 2. Yes they do. 3. I can source them (I believe at $55 each) on an as needed basis. 4. I have tested them on an OEM NSX for a week...

We are proud to announce a major technology upgrade for the NSX. Using this retrofit kit NSX owners will be able to use the most powerful, abundant, and cost effective OEM Honda ignition coil on the market. Installation is full plug and play, no cutting, splicing, adding relays, custom wiring...

Nice clean welds, and Burns stuff is the BEST! Your welder seems to have great control and I'm super happy to see the slip fits are welded as they always seem to leak when boost is added. Nice job, please show more when you can.

Dibs! PM'ed.

Bump! Mounts are now shipping. 1: B2FiNiTY (+ A.Bracket) 2: Bengief - PAID 3: 91nsx85crx (+ A.Bracket) 4: white98sh 5: NSX-GT - PAID 6: ALwAyS4SaLe (+ A.Bracket) 7: jvtec95 - PAID 8: nsxvtecvtec (+A.Bracket) 9: Tony_S PAID 10: Ca2822 PAID

Yes, I can ship via FedEx with signature required. Payment is due prior to shipment. At the moment I'm waiting on machined parts to ship, I'll bump the thread when shipping starts to remind anyone that hasn't paid yet as well. LIST UPDATED: 1: B2FiNiTY (+ A.Bracket) 2: Bengief - PAID 3...

LIST UPDATED: 1: B2FiNiTY (A.Bracket + M. mounts) 2: Scammy (A.Bracket - raw look) 3: 91nsx85crx (A.Bracket + M. mounts) 4: white98sh (M. mounts) - PAID 5: NSX-GT (M. mounts) - PAID 6: ALwAyS4SaLe (A.Bracket + M. mounts) 7: jvtec95 (M. mounts)...

Sorry about that. Mounts will ship when they are stocked before the 10 spots are filled, the discount will expire after 10 uses. I'm expecting to get mount inventory and ship orders late next week or the following week depending when the machined parts arrive. The alternator bracket pricing...

Thank you. I will add you to the list in the thread for the alternator bracket when its opened :) ... LIST UPDATED: 1: B2FiNiTY (A.Bracket + M. mounts) 2: Scammy (A.Bracket - raw look) 3: 91nsx85crx (A.Bracket + M. mounts) 4: white98sh (M. mounts) - PAID 5: NSX-GT (M. mounts) 6: ALwAyS4SaLe...