Im in the process of replacing my headgaskets and got a full head seak kit from SOS and it came with valve stem seals. I got 24 of them but they are of different part numbers. All i could find was that half are seal A and the other half are seal B. Can anyone id which is intake and which is...
Seibon CF hood for pop up headlights. Hood is in good condition minus a small crack on the driver side. It will not come with windshield nozzle sprayers.
Asking 500
Will have to be picked up from 95341
Fixed!!!
Ok so heres the update:
New fast idle valve and EACV delivered today and installed. Dont know which one out of the 2 was the issue but i reset the idle and everything is running smooth now. No more hanging idle at stops and no more hunting idle during cold starts. Thanks y'all!!
Thanks Honcho you're right it is 30 years old. I'll most likey replace both the FITV and the EACV.
This is the first time im hearing about a dash pot. Where would it be located and would it be something that's replaceable also?
I forgot to mention i tested the FITV last night per the service manual and it seemed to be working fine. I got suction during cold start and no suction when it got to operating temps. I also set the idle per the manual but i didnt have a tach so i just used the tach in the dash.
After the...
Honcho, what kind of tachometer did you get? The only one i found locally (harbour freight) was a multi metering type that had rpm pickup. In the service manual it says to hook up by the loop on the ignitor or thru the connector by the engine bay fan location but the tach meter i got just has a...
Drew, driver side A/C was not blowing cool air like the passenger side so i took a peek at the drivers side condenser and the fan was not running. When i put pressure on the fan fiddling with the wire it turned on but it was considerably weaker than the passenger side. I tried putting more...
Thanks for the tips Old Guy and Honcho! I'll take a look at the service manual and check the FIV and EACV the proper way. For the FIV I just opened up the cover and tightened it down with a flat as much as i could and closed it back up. The EACV I took it off and sprayed it down best i could...
Hi there folks new member here and kinda new NSX owner.
I've been having some idling issues with my car (92). The issues are a higher than normal cold start up and when the engine is near its operating temp the revs bounce up and down from 1500 rpms to 2000 rpms about 5 or six times then it'll...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.