• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

WHEELSTO Volk Racing TE37SL [FORGED] in 17"-18" sizing

Status
Not open for further replies.
Joined
30 April 2010
Messages
131
Location
Chicago, IL
wheelsto_slogan.jpg

4825931242_a943862862_o.jpg


RAYS Engineering Volk Racing TE37SL
-WheelSTO is an authorized dealer of Rays Engineering-

Forged wheels, which already enjoy a prominent presence in the market, have become quite familiar to car owners. But the use of the forging process does not necessarily produce a winning product. In a market that values styling as much as performance you have to strike a balance.

Forged wheels made by RAYS embody formidable expertise in balancing lightness and rigidity. In designs that are exhaustively analyzed for rigidity, the form of our wheels immediately communicates high performance.

5506049135_a02ab155e4_b.jpg
(18/19 shown)

5505884841_f9531ddb8f_b.jpg
(18"/19" displayed)

We present you the TE37SL (Super Lap) from RAYS Engineering for NSX specific sizing. The engineers at RAYS have perfected the original TE37. They stripped it down the bare essentials...It comes in one color option -- Pressed Graphite with Diamond cut lip. They have specifically produced the wheel with no center cap option -- Saving weight, and following strict circuit regulations and exceed all JWL ratings. The major feature on this wheel is the fact that they reduced weight while maintaining strength by using the latest mold form forging technology. The cross section of the TE37 Super Lap is slightly different from the traditional TE37. They have managed to shave more weight in the right places -- 400 grams (0.88lbs) off each wheel. Pure Racing Spirit -- TE37SL was born!

4836773874_a542ee5a7d_b.jpg


Sizing:

17" - 18" NSX Specific Sizing!
17 x 7.5 + 40 - Front
18 x 9.5 + 35 - Rear

18 x 10.0 + 40 - Optional Rear

Construction:

Mold Form Forged 1 Piece.
2 Step Forging Process -- 1st forging 5,000 kg/cm^2 / 2nd forging 3500 kg/cm^2. The lip flange is also forged 3500 kg/cm^2.

JWL+R Spec 2 Rating.
jwl.jpg


Weights:

18 x 9.5 +22~ 18.0 lbs
*** The 18 x 9.5 +35 has less hub material which will bring the weight down to approximately 17.5lbs ***
4997052278_11a82bed91_b.jpg


Colors/Finish available:

Pressed Graphite with Diamond Cut Lip with Black Clear coat
te37sl_1.jpg


te37sl_2.jpg


te37sl_3.jpg


4792355124_33dc0df60a_b.jpg


5061219324_a777a25bc5_b.jpg


5061219292_a592c4752c_b.jpg


**All TE37SL's come with the anodized red valve stems, and Volk Racing red spoke decals which can be applied separately. **


How to Order or Get More Information:
Call: 312.880.7767
Email: [email protected]
PM us! Username: WSTO

WheelSTO Wheel & Tire Package Program
WSTO also offers wheel and tire packages. Please Let us know what your favorite tire is, when asking for price quotes . If you are not sure, just let us know and we can make some suggestions for your intended use! WheelSTO uses a Hunter Road Force balancer to ensure your setup is perfectly balanced. Each order includes a printout showing the accuracy. Ask Your WheelSTO Rep about our FREE Mount and Balance Program Today!

- Wide selection of Tires: Yokohama / Michelin / Nitto / Toyo / Dunlop & more
- "Ready to Go"
 
Last edited:
Re: ✚WHEELSTO | Volk Racing TE37SL [FORGED] in 17"-18" sizing!

**IN STOCK & READY TO SHIP **

IMG_0409.jpg


17 x 7.5 + 40 - ** IN STOCK **
18 x 9.5 + 35 -
** IN STOCK **
18 x 10.0 + 40 - ** Coming in 04/2011 **
 
Re: WHEELSTO Volk Racing TE37SL [FORGED] in 17"-18" sizing!

here are some pictures of the set up that we did for a prime member

you can see the difference in concavity and face profile from these pictures.

5913697730_bd4cd92b88_b.jpg


5913161651_a280892486_b.jpg
 
can you PM me a price for 18x9.5 +22 & 19x10.5 +22 thanks!
 
What is the offset on the 17/18 setup in the picture? Also is that flush or am I seeing correctly that that stick out of the rear fender? (Any top view and down the side of the body views?) Is there a offset for the rear that is flush or slightly tucked?

Also PM for price. Thanks!
 
What is the offset on the 17/18 setup in the picture? Also is that flush or am I seeing correctly that that stick out of the rear fender? (Any top view and down the side of the body views?) Is there a offset for the rear that is flush or slightly tucked?

Sizes are:
Front: 17X7.5 +40 <O:tongue:</O:tongue:
Rear: 18X10 +40

The fitment is quite flush with the fenders...does not extend past the tops, but is close. No spacers are being used. This is a fairly common size/offset for these cars. PM me if you want to have a look at these in person. <O:tongue:</O:tongue:
 
Sent you PM and information on the wheels.

currently, we are all out of stock on the 18 - 10.0 et40, but we do have a pair of 18 - 10.0 et30 (quite aggressive) in stock.

18x10 +30 will work just fine as long as the car is lowered - and possibly run a 255/35/18 - I actually like this offset/width.
 
Please PM me pricing for a 17/18 set.
 
Status
Not open for further replies.
Back
Top