- Joined
- 3 May 2020
- Messages
- 204
This is a DIY video for installing a front sway bar on the 1991 NSX, specifically the NSX Type R front sway bar. Some later models, I believe the NA2 97-05 require modification of the battery tray or a narrower battery tray from an earlier model. This job is very simple, but requires the correct tools.
NSX-R Front Sway Bar:https://www.icbmotorsport.com/jdmhona2nsty.html
Tools Required:
-Torque Wrench capable of 17-62 ft*lbs
-17mm Sockets, 17mm Crows Foot & 17mm Wrenches
-10 & 12mm Sockets
-6mm Allen Wrench
May need:
-Pass through socket set
0:00 - Intro
0:10 - Tools Required
0:50 - Summary of Install
1:27 - Sway Bar Removal
3:50 - OEM 1991 vs NSX-R
6:21 - Assembling the bar
6:41 - Sway Bar Installation
NSX-R Front Sway Bar:https://www.icbmotorsport.com/jdmhona2nsty.html
Tools Required:
-Torque Wrench capable of 17-62 ft*lbs
-17mm Sockets, 17mm Crows Foot & 17mm Wrenches
-10 & 12mm Sockets
-6mm Allen Wrench
May need:
-Pass through socket set
0:00 - Intro
0:10 - Tools Required
0:50 - Summary of Install
1:27 - Sway Bar Removal
3:50 - OEM 1991 vs NSX-R
6:21 - Assembling the bar
6:41 - Sway Bar Installation