Recent content by jaffaz32

:( i was offered a set by a prime member, i said I would have them but then they ignored my emails. still after a set.

everything else aside, lets talk gearboxes. My understanding is that the 5 speed box is stronger than the 6 speed due to thicker gears. I have done lots of research and would like to clarify... From my research 550whp seems to be the sweet spot. Anything more you greatly risk blowing a...

I really like the sound of that, do you have any pics? Do they wrap over the top of existing so you can remove at a later date if you was to ever sell the car. Perhaps i'm worrying about nothing? I really would like a dark interior, with red carpets to give the Type R look and think it will...

Thanks Dave, That is great info. I live in the UK so the weather never really gets that hot, We may hit around 30 degrees, maybe a little more in the summer months, which i think is about 86F I do track my car but i don't track my car like some guys. I will go out do maybe 6-10 laps, come in...

My car is Charlotte (brooklands) green and I have a tan interior and i would like to change it a little. I already have aftermarket seats. I would like red carpets, would red carpets and tan everything else work or look odd? Also I would like to add more carbon, i can likely do rear panels...

Mac Attack & Operator This is a very interesting conversation however a little alarming for the right reasons. I have the SOS oil cooler kit, should i be worried? Should i remove it? I have a fully built, low comp stroker build with lovefab turbo kit.

Brian Crower supplies ACL big ends and specify you use oem Honda main bearings. Contacted ACL and they don't make the mains. - - - Updated - - - They only supply the big ends. They also don't specify what size, they just leave you to measure what size. I'm guessing variances in the...

I'm guessing because track pads would be a compromise for street. If you want the stopping power they tend to not be so good when cold, noisy and messy. They may also eat rotors faster. I guess people swap if they don't want the noise and having to clean the wheels every time they go out...

I have already purchased the bearings but just very curious what the procedure would be for a professional garage to determine the sizes needed. Just to make it more fair, this is a high horse power engine and it is crucial that the clearances are spot on. Just wondering if a professional...

If i have a Stop Tech BBK how do i order pads from different manufactures?

Guys, I'm just wondering... When building a motor how do you know what size main bearings? Do you have a batch of different sized bearings to test for fit - install and measure to see if it's within tolerance, if not try another size and measure for fit again and so on until you find the...

Is it possible to have presets? for example ultimate baller mode, bumpy road mode where you will be driving some distance and want it to be a little higher, then a mode for speed bumps and inclines where it is fully raised.

When you say it wont be cheap how much very roughly would you expect it to be? Also what sort of power are they making it to handle?

Any more guys running Yellow Stuff? My car will be around the 500bhp mark and get very occasional track use, so i need to bare that in mind. I have Stop Tech big break kit up front, i'm going to run with their street pads when i initially install them, but for future reference if i want to...

They look so good, almost a shame to put the covers back on.