Recent content by RB Performance Brakes

The rear rotors are the same between CCB and iron but not the front: CCB front = 380x34mm Iron front = 365x32mm Both the diameter and thickness (offset) are different, although they may appear to have the same fitment, so unless you also switch the front calipers or the rotor/pad life may be...

Hardware kit for Brembo and Stoptech two piece rotors - Sinple w/less components but work better. https://racingbrake.com/fk5/

Front: https://racingbrake.com/2156/ Rear: https://racingbrake.com/2157/ Rotors were made for Dali Racing, fitment certified.

We are not against any legitimate dealers in promoting our products, however we prefer they are promoted under an identifiable company. RB would like to credit to Mark Johnson from Deli Racing and Al Terpak of California Auto Technologie for their suggestion and help during our brake...

RB 13" BBK will fit under 17" wheel w/o any offset or clearance issue (between caliper and wheel) Front caliper inside grinding may require to clear the rotors due to OE casting variation. Our BBK front rotors are enlarged to 13" and cover from the earlier model's 282mm to late model 298mm.

Yes, they are available. Drilled & Slotted: http://www.racingbrake.com/NSX_FRONT_91_05_Incl_Front_Rear_brake_lines_p/2076-351-01.htm Open Slot: http://www.racingbrake.com/NSX_FRONT_91_05_Incl_Front_Rear_brake_lines_p/2076-381-01.htm

Here is the link that we have been discussing about our brake development for NSX community: http://www.nsxprime.com/forums/showthread.php?t=30881 Here are the various upgrades available from RB: One-piece rotors Two-piece rotors Brake kits

Here at RacingBrake we are joining with other NSX folks to salute to your accomplishment. Wining this four-hour endurance race is in fact more challenging and prestigious than some of the “professional” races. Your testimonial on RB braking performance proves that a simple (although not in...

This is in response to some of the concerns about the front caliper fitment for older models. RB big rotors and extended brackets are built to preserve the OE calipers (front and rear), which means from 1991 to 2005 (15 years.) During this time Honda (Acura) has altered their caliper...

Hi, this is Warren from RacingBrake. We just learned yesterday that our ocean shipment containing the components needed for BBK just released by customs and we should be able to ship the orders early next week. We apologize for the delay and really appreciate your interest and patience. Our...

We are making the open slot available in addition to slotted only and slot + drill. It will be added to our website with 6-8 weeks leadtime. Thanks

Thank you for the referral. The good part of RB upgrade kit is that the brackets are made to accomondate the old model's caliper and there is nothing else to buy or install other than replacing to RB brackets and rotors.

Congratulations to VintageracerNYC for your win and we are glad that RB brakes worked out great for you which coincides to our belief that a good brake does provide the needed confidence to (brake hard and) win the race. The stock replacement front rotor OD is 298mm. We offer the rotors (two...

Yes, our BBK will fit under 16"-F / 17"-R stock wheels. This upgrade has the following benefits: Very easy to install: Only swapping brackets and rotors. No brake line work (unless you also upgrading to stainless line) Save big money: No bigger wheel or wheel spacers to buy, no big expenses...

First we like to thank all who expressed their interest and called us about our BBK. We scheduled them to be available in October. During the test fit we found out that the rear brackets have to be made differently between earlier (up to 96) and later model (97+) so we need a few more weeks to...