02 Headlights + Aftermarket HIDs

[NSX UNITED]

Hi guys,

Just a quick question for those of you who are running this setup, how do you go about in covering the hole at the bottom of the Headlight (which the OEM Ballast fully covers)?

Needless to say, any images will be greatly appreciated.


Many thanks in advance.

 

[I1O101I]

Go here

http://www.nsxprime.com/forums/showthread.php?t=87093

Bryan

 

[Chris NSX]

Hi guys,

Just a quick question for those of you who are running this setup, how do you go about in covering the hole at the bottom of the Headlight (which the OEM Ballast fully covers)?

Needless to say, any images will be greatly appreciated.


Many thanks in advance.

Owen,

On the bottom of the headlight housing, the hole can be covered with a piece of plexiglass or ABS plastic. There are three screw mounting holes to secure the plastic cover. I would add silicone around the hole to keep out moisture.

2 options.

1. Run the wires to the DS2 bulb through the plastic cover with a rubber gourmet or seal the hole and wires with silicone. No pictures, because I went with OEM HID.
   
   
2. Run the wires to the DS2 bulb through the OEM plastic cover that covers the low beam bulb.

<a href="http://picasaweb.google.com/c12a1b1/Stuff/photo?authkey=V3mI-PNEx-I#5088537028184669666"><img src="http://lh4.google.com/c12a1b1/Rp4dd4defeI/AAAAAAAABiw/c7-dHnCdoBA/s800/Procar_RR_2.jpg" /></a>