• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

1991 needs

Joined
4 March 2023
Messages
12
spare wheel/tyre, cover over the fuel door release lever, all the shocks 4 the rear deck lid and engine deck,front cover under the spare wheel compartment (when i open the hood you can see the street) missing some kinda under the car pan?? thanx
 
spare wheel/tyre, cover over the fuel door release lever, all the shocks 4 the rear deck lid and engine deck,front cover under the spare wheel compartment (when i open the hood you can see the street) missing some kinda under the car pan?? thanx
I have set of shocks with or without springs. [email protected]
 
I have brand new OEM set for the trunk $135 shipped
Good morning,I just got the car friday,and was to tied up this weekend to go over,i am curious if the front and rear deck lid shocks are the same,as I think I may be able to replace one on each and have them boih work w/o having to hold them upo,they work but slip down pretty quickly,thanx Nathan
 
This is normal. I was a bit shocked when I saw this for the first time as well, but undercar aero wasn't as highly prioritized back then.
Thanx,is there someone who makes a cover to go under the spare tyre area,seems a lot of water and debris would find a good home there w/o a floor of some sort? thanx Nathan
 
Thanx,is there someone who makes a cover to go under the spare tyre area,seems a lot of water and debris would find a good home there w/o a floor of some sort? thanx Nathan
ATR Parts in Austria makes one. You can order this one from Honda that is a factory fit:

https://www.amayama.com/en/part/honda/74112sl0z10

Due to the aerodynamics of the car, not much water/trash makes it up into the front bay, even without a cover.

My ad for the struts is here:

https://www.nsxprime.com/threads/hatch-glass-struts.218936/
 
ATR Parts in Austria makes one. You can order this one from Honda that is a factory fit:

https://www.amayama.com/en/part/honda/74112sl0z10

Due to the aerodynamics of the car, not much water/trash makes it up into the front bay, even without a cover.

My ad for the struts is here:

https://www.nsxprime.com/threads/hatch-glass-struts.218936/
great,just need to wade thru the diagram and see what parts i would need.I am gonna try and get over to my car @ lunch and see what's up and get back,I appreciate your help,N
 
great,just need to wade thru the diagram and see what parts i would need.I am gonna try and get over to my car @ lunch and see what's up and get back,I appreciate your help,N
Remember the lower cover is designed to work with a vented hood. The hot air needs a way to escape- in the stock car the air is sucked down around the battery tray and under the car. If you block the bottom you need to open the top. :)
 
Remember the lower cover is designed to work with a vented hood. The hot air needs a way to escape- in the stock car the air is sucked down around the battery tray and under the car. If you block the bottom you need to open the top. :)
Makes sense,thanx
 
you looking for battery tray for front fyi
Morning, My battery tray is fine. I was looking for a spare tyre,but discovered the my OZ wheels are 18" and 19" so not sure a std spare would be much help.I also think the spare from my 02 S2K will work, but not sure yet.Seems a can of "fix a flat" may become my spare. I am new to these crs so just wallowing thru all this,thanx
 
"ont cover under the spare wheel compartment (when i open the hood you can see the street) missing some kinda under the car pan" that is battery tray
 
I have Oem Nsx Engine Maintenance Lid Cover complete if still interested
 

Attachments

  • IMG_0948.jpeg
    IMG_0948.jpeg
    289.3 KB · Views: 9
  • IMG_0015.jpeg
    IMG_0015.jpeg
    253.5 KB · Views: 9
Last edited:
Back
Top