2002 conversion help needed

[nsxsocal]

HI,
I am in the process of doing a 2002 update. I read the threads on what front bumper parts can be reused versus what has to be ordered and I ended up ordering all of the pieces to the bumper and headlights. (just because i didn't want to have reused parts in my conversion)

anyway. could someone do me a huge help and pm me or email me the instructions on assembly of the headlights (i have the raw nsxr headlights and the ballast ignitor, bulbs etc) and i would just like to see the what honda recommends.

also i would like to see the sequence for assembly of the front bumper (02+) again i can look at my old one as a reference, but i would prefer to have the recomended steps as a guide.

Thanks for the help my email address is [email protected] or if you need to fax, please pm me

 

[NSXGMS]

HI,
I am in the process of doing a 2002 update. I read the threads on what front bumper parts can be reused versus what has to be ordered and I ended up ordering all of the pieces to the bumper and headlights. (just because i didn't want to have reused parts in my conversion)

anyway. could someone do me a huge help and pm me or email me the instructions on assembly of the headlights (i have the raw nsxr headlights and the ballast ignitor, bulbs etc) and i would just like to see the what honda recommends.

also i would like to see the sequence for assembly of the front bumper (02+) again i can look at my old one as a reference, but i would prefer to have the recomended steps as a guide.

Thanks for the help my email address is [email protected] or if you need to fax, please pm me

There is no Honda recommendation for installing the 02+ lights because they never intended for them to be installed on a pre-02 NSX.

Obviously you'll need to cut some frame pieces for the lights to fit and you'll also need special brackets to mount them which come as a kit from Dali and I believe SOS sells it as well.

The bumper assy. is very easy to install and should mount right on, no problems. If you have or had frame damage the mounting holes might not alight properly and the holes in the bumper might either need to be egged out or the frame pulled.

 

[nsxsocal]

I am not looking for honda recomendations on how to install the lights, just how to assemble all the 2002 + honda parts onto the lights. (just like one was being put together for a new car)

 

[comtec]

I am not looking for honda recomendations on how to install the lights, just how to assemble all the 2002 + honda parts onto the lights. (just like one was being put together for a new car)

If you can wait till this weekend i have pic's of most of what you need. Untill then here is a pic i had posted on another thread that may be of some help.

 

[BD]

Downforce has their 02 conversion at a very affordable price. Call Peter up and tell him Vance refered you - If you are interested.

 

[RQNSX]

tom dealer fax me the instruction today call tomorrow

 

[socalx]

Ramon, thanks .. you are the best! i started today with a lot of questions and thanks to you, Jason, Erik and detlef I will be going to bed with all of the fears behind me.

Tom

 

[NA1/2-R GT]

http://www.nsxprime.com/forums/showthread.php?t=91273

And now you are selling your NSX-R headlights????
Let me guess, someone told you that NSX-R lights won't work with LHD NSX!