2003 - anything I should do before I start my build

Joined
21 December 2012
Messages
191
I just got my 03 about a month back that has 21k on it but only 1k on the block. I paln on replacing a few seals due to wind noise, oil, brake fluid, coolant, trans oil, fuel filter, and gear oil. Am I missing anything? Timing belt??
Im going to supercharge so I want to get it in tip top before I boost it. Also need to put about 1500 more mile on it before switching off of standard oil for eninge break in.
 
unless the seals are actually torn/broken wind noise in the NSX is usually caused by driver and passenger window alignment. The front and rear targa seals are over $1K each so I would check your side window alignments FIRST before changing out the targa seals......unless they are visibly damaged. There are various threads here on Prime about the proper way to align the windows.
 
One thing - post in the 'Builds' section ;)
 
I have noise at all speeds from driver window, and behind the passanger seat. Its not the door so I guess its the hatch. I dont think I want to do it myself so would you recomend taking the car to the dealer? Acura should be able to resolve it right? Also, would they clean and re grease the windows?
 
Last edited:
Back
Top