The ZetoolBox Sub Enclosure V2 available in black carbon fiber once again!! Takes longer to get made per order paid in advance of production.
PM me your email address for install info!
The V2 is designed to hold the JL10W1 or the 10W3 with a spacer, or simular. Has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passanger side, if that matters! The CF may have some minor sways in the fiber but will look great when put in the foot well.
V2 in Black Carbon Fiber $500.00 + shipping & clips
V2 in Black gel coat $300.00 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/V2_black_CF_1.JPG" />
I will offer them empty for you to do your own set up. You can get the V3 designed to not loose any foot space and holds the shallow mount SWS10x made by Earthquake. Has about .35 cu. ft. of air space!
V3 $300 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final.JPG" />
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final_front.JPG" />
Set of aerospace clips $20 while supplies last!
I can set them up and assemble if needed, just pm for details.
pm me as emails from here do not go through.
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman
PM me your email address for install info!
The V2 is designed to hold the JL10W1 or the 10W3 with a spacer, or simular. Has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passanger side, if that matters! The CF may have some minor sways in the fiber but will look great when put in the foot well.
V2 in Black Carbon Fiber $500.00 + shipping & clips
V2 in Black gel coat $300.00 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/V2_black_CF_1.JPG" />
I will offer them empty for you to do your own set up. You can get the V3 designed to not loose any foot space and holds the shallow mount SWS10x made by Earthquake. Has about .35 cu. ft. of air space!
V3 $300 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final.JPG" />
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final_front.JPG" />
Set of aerospace clips $20 while supplies last!
I can set them up and assemble if needed, just pm for details.
pm me as emails from here do not go through.
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman