I have a used Comptech Exhaust system that is blown/damaged muffler for sale.
Manufacture: Comptech USA
Fitment: '91-'94 NA1
Generation: Dual Round Tips
Condition: All parts Fair, except of the damaged muffler
Mileage: Unknown (came with my car when I purchased it used)
Damage: I believe a baffle was blown (known issue with Comptech Exhaust) and the previous owner cut open the muffler in attempt to repair it. Between 2.5k-3.5k rpm it makes what appears to be a internal rattling sounds. The 'clean' side of the muffler has a few dents as well. Please see the damage in the pictures below.
Price: SOLD which will run ~$30-50 due to weight and size. You can estimate S&H cost at ups.com. Weight is ~30 lbs. My zip is 37203.
Please lock trend.
Thanks Prime.
I would not use this exhaust as is.
Ideally, this should be used as parts for the tips, piping, and hangers.
I recommend replacing the muffler with a Magnaflow, Flowmaster, etc.
Top side of the exhaust system. When the exhaust is installed, you cannot see the cut out of the muffler as it is facing towards the car.
Hi-Res Link
http://www.nsxprime.com/photopost/showphoto.php?photo=34446&size=big&cat=&ppuser=18664
Bottom side of the exhaust system
Hi-Res Link
http://www.nsxprime.com/photopost/showphoto.php?photo=34447&size=big&cat=&ppuser=18664
Close up of round tip
http://www.nsxprime.com/photopost/showphoto.php?photo=34445&size=big&cat=&ppuser=18664
Close up of damaged muffler
http://www.nsxprime.com/photopost/showphoto.php?photo=34444&size=big&cat=&ppuser=18664
Let me know if you have any questions.
Thanks.
-Dan
Manufacture: Comptech USA
Fitment: '91-'94 NA1
Generation: Dual Round Tips
Condition: All parts Fair, except of the damaged muffler
Mileage: Unknown (came with my car when I purchased it used)
Damage: I believe a baffle was blown (known issue with Comptech Exhaust) and the previous owner cut open the muffler in attempt to repair it. Between 2.5k-3.5k rpm it makes what appears to be a internal rattling sounds. The 'clean' side of the muffler has a few dents as well. Please see the damage in the pictures below.
Price: SOLD which will run ~$30-50 due to weight and size. You can estimate S&H cost at ups.com. Weight is ~30 lbs. My zip is 37203.
Please lock trend.
Thanks Prime.
I would not use this exhaust as is.
Ideally, this should be used as parts for the tips, piping, and hangers.
I recommend replacing the muffler with a Magnaflow, Flowmaster, etc.
Top side of the exhaust system. When the exhaust is installed, you cannot see the cut out of the muffler as it is facing towards the car.
Hi-Res Link
http://www.nsxprime.com/photopost/showphoto.php?photo=34446&size=big&cat=&ppuser=18664
Bottom side of the exhaust system
Hi-Res Link
http://www.nsxprime.com/photopost/showphoto.php?photo=34447&size=big&cat=&ppuser=18664
Close up of round tip
http://www.nsxprime.com/photopost/showphoto.php?photo=34445&size=big&cat=&ppuser=18664
Close up of damaged muffler
http://www.nsxprime.com/photopost/showphoto.php?photo=34444&size=big&cat=&ppuser=18664
Let me know if you have any questions.
Thanks.
-Dan
Last edited:
