• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Comptech Front Camber Bushings

Joined
19 April 2016
Messages
589
Location
Atlanta
NOS (New Old Stock)

$300 shipped SOLD SOLD SOLD SOLD

Item description from Comptech:

Competition Camber Adjuster Ball Joint Mounts Designed to replace the centered stock steel ball joint mounts pressed into the front upper & lower control arms

These mounts make it possible subtract up to 2 degrees camber

This allows alignment to be brought into the -4 degree range desired by track driven NSX's with slicks

These machined ball joint mounts will press into the upper and lower control arm and offset the main upright, giving you more static negative camber to start with, then adjust the alignment as normal to your specific track specifications

Once in place these mounts are fixed & can not be adjusted

Comes with parts for both front upper and lower control arms of the Acura NSX

Application: 91-05 Acura NSX
 
Last edited:
price reduced $300 shipped
 
Do you have the install instructions for these?

1. put these in the freezer for an hour or 2
2. press out old bushings
3. press in these bushings with a bit Honda bearing grease
4. position the hole facing outboard or inboard depending if you want more or less camber in front
5. get an alignment
6. enjoy, drink a beer
 
Back
Top