• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Comptech Pro(Koni 3012) coilovers, re-built at Koni FS

Not open for further replies.
8 November 2003
Portland OR
Comptech Pro coil over suspension. This was the best Comptech ever offered!

These use Koni 3012 race dampers on all 4 corners, with separate rebound and compression adjustment.

Adjustable spring perches and they have the standard issue 1000 lb. front, 600 lb. rear coils.

They include all hardware and better than new as far as function. I just had them rebuilt at Koni North America, they have all new seals, bumpers, guides and shafts. The spring perches have been drilled so they won't clog with grit and bind on the damper bodies. One of the perches was bound up when I got these and I needed to shorten it as you can see one is an inch or so shorter, there is still plenty of travel and the thread has full engagement on the body.

I have become a JRZ distributor, so I need to sell these to make way for the dampers on my car!

$2600 OBO

PM with questions.
Last edited:

Thanks Prime, please lock the thread.

Not open for further replies.