Can any one tell me how to remove the shift handle on a 91 automatic,
a bit concerned I'll tear it up by guessing??
a bit concerned I'll tear it up by guessing??
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
How to remove shift handle on automitic
- Thread starter Edresh
- Start date
- Joined
- 10 November 2002
- Messages
- 1,124
Re: How to remove shift handle on automatic
This is a very simple and straightforward task. :smile: There is one phillips screw about halfway down the driver's side of the handle. Remove that and pull straight up.
The top of the handle holds a spring which provides tension to the button. Be sure to put the spring back in when reinstalling. It isn't tricky to reinstall the shifter either; place the spring behind the shifter button, then slide the shifter handle down over the shifter shaft until the hole for the phillips screw lines up, and reinstall the screw.
So easy even I can do it! :smile:
This is a very simple and straightforward task. :smile: There is one phillips screw about halfway down the driver's side of the handle. Remove that and pull straight up.
The top of the handle holds a spring which provides tension to the button. Be sure to put the spring back in when reinstalling. It isn't tricky to reinstall the shifter either; place the spring behind the shifter button, then slide the shifter handle down over the shifter shaft until the hole for the phillips screw lines up, and reinstall the screw.
So easy even I can do it! :smile:
Similar threads
