Just a quick question

[yeaiwonder88]

So Ive been thinking about buying some 2004 Saleen Wheels. I was just checking to see if they will fit on my 1992 NSX. Stupid question i know but these are just going to be the rims i drive to and from atlant to sc with any help will be great thanks..

 

[Hapa88]

The fronts for sure won't fit. 18x9 is too wide and the offset is too low. The wheel will stick out past the fender, not to mention all the problems associated with that.

I'm basing my info from this:
http://www.americanmuscle.com/hysa1.html

 

[yeaiwonder88]

I was talking as far as the bolt pattern.. and so forth?

 

[angus]

Yes , the bolt pattern will fit , even the hub bore is correct , but as Adrian was trying to tell you , they WON'T fit , you won't be able to steer without tearing the fenders off! Actually even if you took the fenders off it would not work.
There are wheels that are too big but will still sort of work , these are about 10 steps beyond that!

 

[yeaiwonder88]

trust me they are no bigger than the 18/19 setup i have on my car now..the front are 17x8 and the rear is 17x9

 

[vtecNSX1]

Well everyone is telling you they arent going to fit, but you seem convinced they will, so why even bother asking?

 

[yeaiwonder88]

I just wanted to know if the bolt pattern would thats all

 

[adrenaline_nsx]

front wheels dont fit and will stick out. here is an old pic of my car.

 

[Hapa88]

front wheels dont fit and will stick out. here is an old pic of my car.

Thanks adrenaline_nsx. That's pretty much what I was trying to say. The Offset is too low.