• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Exterior Kevlar / carbon engine cover

Joined
23 May 2020
Messages
715
Location
SF Bay Area
For your consideration is an engine cover made out of Kevlar, carbon, and fiberglass. I’m 95% sure it is the GruppeM GM-0112: https://www.gruppemdirect.com/products/acura-nsx-engine-cover-carbon-fiber-gm-0112

$675 shipped in the continental USA

It fits over your ctsc! It weighs 6.5lbs

1101dd655f4449df0d5d6c21111ec636.jpg


0d6bcc46614bba4c847d068dd8906ca1.jpg


713f407d47cb958e3d81dda4dbb228e4.jpg


dd7f6fb76c13a81e6aedff6cb99d4885.jpg



03425aed87bfc46c70d71d9035fd8636.jpg


645c8a075875c3102f9130146befe6bc.jpg


ac6a913e993ede54c954f515838cc476.jpg


There are 2 blemishes, both are visible in the first pic.

1. The mesh has some rust/discoloration above the sc snout, likely from driving the car in the wet

2. There are some small cracks on the passenger side corner near the cabin. They are only in the top layers and not in the fiberglass. I only noticed them when taking the cover off a couple weeks ago

9e14a8b2677deee28acd031b7d87fc86.jpg


0e32d3506e000c4aa03cf05a9076f259.jpg
 
Last edited:
Back
Top