Koni Adjustment tool - any alternative other than Dali?

Lot's of places carry them ... try a Google search.

Of course, you can just find a small wrench or socket and save the $.
 
I used to have a Koni adjuster from about 1996 which would just fit, I know the new ones won't. I have Dali one now, and it works great.

I wonder if a schrader air valve core tool would work, seems like the right shape and if you use a steel one it would hold up. Worth a try.
 
titaniumdave said:
I used to have a Koni adjuster from about 1996 which would just fit, I know the new ones won't. I have Dali one now, and it works great.

I wonder if a schrader air valve core tool would work, seems like the right shape and if you use a steel one it would hold up. Worth a try.

Nope. Scharder valve tool dont work.. I will have to work some metal out of it. and after that I doubt there is enough metal to keep it in shape.
 
I just made one from a 4.5 mm socket.

It fit nicely on a couple of the adjuster tips, but it required just a little reaming with a drill bit to make it fit the other ones.
 
I made a tool from a 1/4" socket extension with the square end cut off and slotted to fit Koni shock. I then drilled out the Koni adjuster knob they gave you to fit the other end of the extension and expoxied the two together. I've had this for over 10 years now and it still works like a charm.
 
Back
Top