KW V3 Coilovers and Custom Spring Packages by FX Motorsports Development

[ANYTIME]

Billy posted it at the top
The KW suspensions coilover for the Acura NSX enables the owner to lower their vehicle 20 to 50mm on the front axle and 25mm to 55mm on the rear axle. The coilover suspension retains enough travel to handle maximum load and dynamic loads during driving. Double adjustable rebound and compression damping allows a truly individual performance driving setup from agressive track to fine tuning the ride quality and comfort for every day driving.

how low do these go drop wise ?

so the front the helper spring is on the bottom?

and the rear its on the top?

 

[etang789]

I wonder if I should opt for the optional 1993 NSX-R springs with the matching sway bars

"1993 NSX-R / 1997 NSX S-Zero - 8K/6.12K springs (448lb/343lb)"

 

[stuntman]

I wonder if I should opt for the optional 1993 NSX-R springs with the matching sway bars

"1993 NSX-R / 1997 NSX S-Zero - 8K/6.12K springs (448lb/343lb)"

You can do that or just get a higher spring rate swaybars.

 

[etang789]

Does it matter if you put the helper springs on top or at the bottom of the main springs?

 

[stuntman]

Does it matter if you put the helper springs on top or at the bottom of the main springs?

Not really, but helper spring on the bottom is probably better.