Need help on recaro seats

JZ

Contributing Member
Joined
11 August 2001
Messages
168
Location
Flushing New York
I just recently purchased pair of Recaro pole position seats from Dail Racing. It only came with both seats, there are no mounting brackets to install them. I tried calling Recaro USA for support. But no one get back to me at all. I was wondering if anyone here have experience installing these seats onto the car?
 
We now have the rails back in stock.

The rails do work with the Recaro Pole Position, however, since he PP are so wide, you need to mount them above the seat rails (you don't get the full headroom gain, about 1/2-1" less). You also need to use higher-mount seat brackets, like the Sparco aluminum seat brackets. I have a couple customers now with this setup.

I also have another customer that is using the TAITEC rails, but welding them about 1/2" wider.

The rails were designed for use with Recaro SPG. Pole Positions will work with them, they just require a little creativity.

Regards,
-- Chris

------------------
SoS_logo.gif


http://www.NSXClassifieds.com - free NSX classifieds site!
 
Back
Top