New front offset

[Bobolinski]

Here is the look with 34 offset instead of 28. Much better on high speed compression. The 34 has a more narrow lip by 1/2 inch. Now we are going to design the fronts so they are at fender edge but also have the wider lip. I hope this info will be useful to us all.

 

[Bobolinski]

Is it just me or is that rear tire the sickest?

 

[4AU4LIFE]

Dude, what kind/size wheels are those?

 

[leatherseats]

Could you post a picture of the sidewalls showing the tire sizes? Eric doesn't believe that those are really 215/315 F/R widths :biggrin:

 

[Bobolinski]

Could you post a picture of the sidewalls showing the tire sizes? Eric doesn't believe that those are really 215/315 F/R widths :biggrin:

Here are the fronts I will post rears tomm

 

[RP-Motorsports]

sicker than sick! :biggrin:

 

[len3.8]

sicker than sick! :biggrin:

Send me prices... I may be up for a set to fit a widebody.
Thanks
Len

 

[Hydro]

Send me prices TOO

 

[Onsoku]

sicker than sick! :biggrin:

RP, are you still working on a similar setup? I recalled that you were heading in the same direction.

 

[Bobolinski]

Here are the fronts I will post rears tomm

And heres the rear for your dining pleasure! :smile:

 

[Onsoku]

LOOKS SWEET!

What are the sizes and offsets?

What tire is that?

Did you have to do any special mods?

Are you making wheels?

Will they clear BBK's?

 

[NSX-Racer]

From the pics it seems that you have some negative camber at the rears (appr. -1.5 to 2 deg.) but about 0 deg. at the fronts. I'd suggest some more neg. camber there for the handling or am I wrong?

 

[Bobolinski]

I am going in for an alignment once my final set of fronts are installed. I will be setting the car up for max tire wear. I do not race my car I drive around town and events only.My goal in this project was to design a wheel tire package that looks the sickest while not requiring any fender mods. I have mounted 3 to 4 different sets to get the sizing just to my liking. I will have newer fronts next week. They will come to fenders edge and get my 2.75 inch lip back. I will also be lookng at a NSX-R copy in a 19x11 and 18x8 soon.

 

[Onsoku]

I am going in for an alignment once my final set of fronts are installed. I will be setting the car up for max tire wear. I do not race my car I drive around town and events only.My goal in this project was to design a wheel tire package that looks the sickest while not requiring any fender mods. I have mounted 3 to 4 different sets to get the sizing just to my liking. I will have newer fronts next week. They will come to fenders edge and get my 2.75 inch lip back. I will also be lookng at a NSX-R copy in a 19x11 and 18x8 soon.

So your setup is 19*11 +34 & 18*8 +34? It looks sweet dude; do you have a rear pic?!?

Is RP Motorsport the the company I need to contact in order to get a similar setup?

...damn...nice setup...

 

[RP-Motorsports]

Once all final pricing is set, we will post. I was doing a 315 wide for a guy who wanted the TE37 in a 10.5" We found out that the 10.5" TE37 is no longer made! So WORK and other custom built wheels (like above) will suffice. A + 47mm or +48mm will hold a 315 tire. (depending on suspension and camber) You can find a wheel that is avail in that offset, or just above that (example +50mm +55mm etc etc) and use a spacer to move it back to +48mm. Or better yet get one built to the exact offset needed!

Stay tuned.....

 

[Esprit1]

Hi RP-Motorsports,

You got PM. I private e-mail via [email protected] but didn't get through.

Thanks Regard
Paul

 

[RP-Motorsports]

Hi RP-Motorsports,

You got PM. I private e-mail via [email protected] but didn't get through.

Thanks Regard
Paul

small "s" [email protected]

We are working on pricing yet.

 

[Bobolinski]

Tom can't reach you call me
Dan
925-570-7800

 

[RP-Motorsports]

Tom can't reach you call me
Dan
925-570-7800

Damn that tom....he is always on the phone when I call....... :biggrin:

It helps that you made me put your name/number in my phone for ID Dan! :wink:

Have fun at the party with your son!